Damage Requiring Service -
this product from the wall outlet and all
power sources Including battery, and refer
servicing to qualified service personnel
under the following conditions:
a. When the power-supply cord or plug is
b. If any liquid has been spilled onto, or
objects have fallen into, the product
If the product has been exposed to rain
d. If the product does not operate normally
For added proteCtiorl of this
even if you follow the operating
instructions. AdJ ust on Iy those controls
product during a lightning storm, or when
that are covered by the operation
It is left unattended and unused for long
instructions. Improper adjustment of
periods of time, disconnect It from the wall
other controls may result In damage and
outlet and disconnect the antenna This will
will often require extensive work by a
prevent damage to the product due to
qualified technician to restore the
lightning and power-line surges.
product to Its normal operation.
Do not overload wall outlets
e. If the product has been dropped or the
and extension cords as this can result In a
cabinet has been damaged.
risk of fi re or electric shock.
f. When the product exhibits a distinct
Objects and Liquid Entry -
change in performance This indicates a
objects of any kind into this product
need for service.
through openings as they may touch
Replacement Parts -
dangerous voltage points or short out parts
parts are required, be sure the service
that could result
a fire or electriC shock
technician has used replacement parts that
Be careful not to splil liqUid of any kind
are specified by Canon or that have the
onto the product.
same charactenstics as the onginal part
17. SerVicing --- Do not attempt to service thiS
Unauthorized substitutions may result in
product yourself as opening or removing
fire, electric shock or other hazards
covers may expose you to dangerous
20 Safety Check -
Upon completion of any
voltage or other hazards Refer all serv;cing
service or repairs to this product, ask the
to qualified service personnel
service techniCian to perform safety checks
to determine that the product is in safe
When replacement of power supply is required, please return it to the
responsible nearest Canon Service Center and please replace it With the same
type number CA-570.
The Adapter can be used with a power supply between 100 and 240 V AC.
For areas where 120 V AC power is not used, you will need a special plug
adapter. Contact your nearest Canon Service Center for further information.
Use only CSAlUL Certified power supply cord set, Polarized, Type SPT-2 or
heavier, minimum No. 18 AWG copper, rated 125 or 250 V, minimum ,P A,
minimum 6 ft (1.8 m), maximum 10ft (3 m) long.