Use the auto setting for normal outdoor scenes.
When the program selector is set to
white balance is preset to [AUTO].
The camcorder retains the custom white balance setting even If you turn it off.
However, it resets to [AUTO] when you change the position of the TAPE/CARD
When you have set the custom white balance:
- Depending on the light source, "
may keep flashing. The result will still
be better than with the auto setting.
Reset the white balance when the lighting condition changes.
- Turn off the digital zoom.
Custom white balance may provide better results in the following cases:
Changing lighting conditions
a single color (sky, sea or forest)
- Under mercury lamps or certain types of fluorescent lights