You can record sound in two audio modes-16-bit and 12-bit. The 12-bit mode records
sound on two channels (stereo 1), leaving 2 channels free (stereo 2) for adding new
sound later. Select the 16-bit mode for higher sound quality.
Open the menu and select [AUDIO SETUP]. Select [AUDIO MODE]. set it to
[16bit] and close the menu.
116bit" appears for approximately 4 seconds.
The camcorder reduces wind noise automatically. However, you can turn off the wind
screen when recording indoors, or when you want the microphone to be as sensitive
_A_U_D _I O _S_E_TU_P
WIN 0 SC RE EN • • AUTO
Open the menu and select [AUDIO SETUP). Select [WIND SCREEN]. set it to
[OFF] and close the menu.
"WS OOB" appears when you turn the Wind screen off.
0 The wind screen function can only be used with the built-in microphone.
The wind screen function can also be used for audio dubbing (when [AUDIO
DUB.] is set to [MIC. IN] in the [AUDIO SETUP] submenu).