Introduction - Kontron KTQM67/mITX User Manual

KTD-N0819-K

Introduction

This manual describes the KTQM67/mITX, KTQM67/Flex and KTQM67/ATXP boards made by
KONTRON Technology A/S. The boards will also be denoted KTQM67 family if no differentiation is
required.
The KTQM67 boards, all based on the QM67 chipset, support 2
2Core and 4Core processor and the Celeron B810 2Core, see "Processor Support Table for more
specific details.
The KTQM67 family consist on members having different form factors, and the same functionality
except for the functions listed in the table below.
KTQM67 variants
KTQM67/mITX
KTQM67/Flex
KTQM67/ATXP
Use of this Users Guide implies a basic knowledge of PC-AT hard- and software. This manual is
focused on describing the KTQM67 board's special features and is not intended to be a standard PC-AT
textbook.
New users are recommended to study the short installation procedure stated in the following chapter
before switching-on the power.
All configuration and setup of the CPU board is either done automatically or manually by the user via
the CMOS setup menus. Only exception is the "Load Default BIOS Settings" Jumper.
Page 7
LPT
Format PCI SODIMM Sockets
-
mITX -
1
Flex 3
1
ATX 6
nd rd
and 3 generation Intel® i7 -, i5 -, i3
Single +12V Power Supply
2 Yes
4 No
4 No
KTQM67 Users Guide
Introduction