Kontron KTQM67/mITX User Manual page 135

KTD-N0819-K
Table continued:
Function
Max TOLUD
NMode Support
Memory Scrambler
MRC Fast Boot
Force Cold Reset
DIMM Exit Mode
Power Down Mode
Scrambler Seed
Generation Off
Memory Remap
Memory Alias Check
Channel A DIMM Control
Channel B DIMM Control
Page 135
Selection
Dynamic
1 GB
1.25 GB
1.5 GB
1.75 GB
2 GB
2.25 GB
2.5 GB
2.75 GB
3 GB
3.25 GB
Auto
1N Mode
2N Mode
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Auto
Slow Exit
Fast Exit
No Power Down
APD
PPD
APD-PPD
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enable Both DIMMS
Disable DIMM0
Disable DIMM1
Disable Both DIMMS
Enable Both DIMMS
Disable DIMM0
Disable DIMM1
Disable Both DIMMS
Description
Maximum Value of TOLUD.
Dynamic assignment would adjust TOLUD
automatically based on largest MMIO length of
installed graphic controller.
Nmode Support Option
Enable or disable memory scrambler.
Enable or disable MRC Fast Boot
Force cold reset or choose MRC cold reset
mode, when cold boot is required during MRC
execution. Note: If ME 5.0MB is present, Force
cold reset is required!
DIMM Exit Mode control.
Power Down Mode control.
Control Memory Scrambler Seed Generation.
Enable – do not generate scrambler seed.
Disable – Generate scrambler seed always.
Enable or disable Memory Remap above 4G.
Enable or disable Memory Alias Check.
Enable or disable dims on channel A.
Enable or disable dims on channel B.
KTQM67 Users Guide
BIOS - Chipset