Kontron KTQ45/Flex User Manual
  1. Manuals
  2. Brands
  3. Kontron Manuals
  4. Motherboard
  5. KTQ45/Flex
  6. User manual

Kontron KTQ45/Flex User Manual

Ktq45 series motherboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

KTQ45/Flex
KTQ45/ATXE
KTQ45 Users Guide
KTD-00782-H
If it's embedded, it's Kontron

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KTQ45/Flex and is the answer not in the manual?

Questions and answers

Related Manuals for Kontron KTQ45/Flex

Summary of Contents for Kontron KTQ45/Flex

  • Page 1 KTQ45/Flex KTQ45/ATXE KTQ45 Users Guide KTD-00782-H If it’s embedded, it’s Kontron...

  • Page 2: Document Revision History

    Brand and product names are trademarks or registered trademarks of their respective owners. Disclaimer: KONTRON Technology A/S reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance.

  • Page 3: Life Support Policy

    KONTRON Technology Technical Support and Services If you have questions about installing or using your KONTRON Technology Product, check this User’s Manual first – you will find answers to most questions here. To obtain support, please contact your local Distributor or Field Application Engineer (FAE).

  • Page 4: Table Of Contents

    PCIe Passive Graphic card support ..................21 Power Consumption ........................22 Connector Definitions ..............24 Connector layout ......................... 25 3.1.1 KTQ45/Flex ..........................25 3.1.2 KTQ45 - IO Bracket area ......................25 3.1.3 KTQ45/ATXE ..........................26 Power Connector (ATXPWR) ..................... 27 Keyboard and Mouse connectors ....................
  • Page 5 KTD-00782-H KTQ45 family Page 5 of 92 Serial Ports ..........................35 3.8.1 COM1 Connectors ........................35 3.8.2 COM2 and COM3 Header Connectors ..................36 3.8.3 COM4 Header Connectors ......................36 Ethernet Connectors ........................37 3.9.1 Ethernet Connectors 1 and 2 (ETHER1 and ETHER2) ............. 37 3.10 USB Connectors (USB) ......................
  • Page 6 KTD-00782-H KTQ45 family Page 6 of 92 System Management BIOS (SMBIOS/DMI) ................57 Legacy USB Support........................57 BIOS Update ..........................57 BIOS Configuration/Setup ..............58 Introduction ..........................58 Main Menu ..........................58 Advanced Menu .......................... 59 6.6.1 Advanced settings – CPU Configuration ................... 60 6.6.2 Advanced settings –...
  • Page 7 KTD-00782-H KTQ45 family Page 7 of 92 Warranty ..................92...

  • Page 8: Introduction

    Page 8 of 92 Introduction This manual describes the KTQ45/Flex and KTQ45/ATXE boards made by KONTRON Technology A/S. The boards will also be denoted KTQ45 family if no differentiation is required. The KTQ45 boards supports the Intel® Core™2 Quad processor Q9000 series, the Intel® Core™2 Duo processor E8000 and E7000 series with a maximum TDP of 95W.

  • Page 9: Installation Procedure

    Installation procedure Installing the board To get the board running, follow these steps. In some cases the board shipped from KONTRON Technology has DDR3 DRAM mounted. In this case Step 2 can be skipped. 1. Turn off the power supply Warning: Turn off PSU (Power Supply Unit) completely (no mains power connected to the PSU) or leave the Power Connectors unconnected while configuring the board.
  • Page 10 KTD-00782-H KTQ45 family Page 10 of 92 Visually inspect protective cover for damage If damage observed, replace the cover. Note: After cover removal, make sure socket load plate and contacts are free of foreign material. Debris may be removed with compressed air. Note: Removing protective cover after CPU insertion will compromise the ability to visually inspect socket.

  • Page 11: Requirement According To Iec60950

    KTD-00782-H KTQ45 family Page 11 of 92 Requirement according to IEC60950 Users of KTQ45 family boards should take care when designing chassis interface connectors in order to fulfil the IEC60950 standard: When an interface/connector has a VCC (or other power) pin, which is directly connected to a power plane like the VCC plane: To protect the external power lines of the peripheral devices, the customer has to take care about: ·...

  • Page 12: System Specification

    KTQ45 family Page 12 of 92 System specification Component main data The table below summarizes the features of the KTQ45/Flex and KTQ45/ATXE embedded motherboards. Form factor KTQ45/Flex: Flex-ATX (190,5 millimetres by 228,6 millimetres) KTQ45/ATXE: Embedded-ATX (190,5 millimetres by 304,80millimeters) ·...
  • Page 13 Expansion PCI Bus routed to PCI slot(s) (PCI Local Bus Specification Revision 2.3) Capabilities KTQ45/Flex: 2 slots PCI 2.3, 32 bits, 33 MHz, 5V compliant KTQ45/ATXE: 4 slots PCI 2.3, 32 bits, 33 MHz, 5V compliant · PCI-Express bus routed to PCI Express slot(s) (PCI Express 2.0) KTQ45/Flex and KTQ45/ATXE: 1 slot PCI-Express x16 (PCI Express 2.0)
  • Page 14 Product Category CCN: NWGQ2, NWGQ8 File number: E194252 Theoretical MTBF: 449.463 / 226.855 hours @ 40ºC / 60ºC for the KTQ45/Flex 352.559 / 174.306 hours @ 40ºC / 60ºC for the KTQ45/ATXE Restriction of Hazardous Substances (RoHS): All boards in the KTQ45 family are RoHS compliant.

  • Page 15: System Overview

    The block diagram below shows the architecture and main components of the KTQ45 boards. The two key ® ® components on the board are the Intel Q45 and Intel ICH10DO Chipsets. Components shown shaded are optional depending on board type (KTQ45/Flex and ATXE) and variants of the board.

  • Page 16: Processor Support Table

    Failed CPU’s are indicated by text. Some of the processors in the list are distributed from Kontron, those CPU’s are marked by an * (asterisk) right after the CPU number. However please notice that this marking is only guide line and maybe not fully updated.
  • Page 17 KTD-00782-H KTQ45 family Page 17 of 92 Clock Cache sSpec no. Thermal Processor Brand Speed Speed Number Guideline [GHz] [MHz] [MB] [Watt] Intel® Core™ 2 Duo 3.00 1333 E6850 (Conroe) 2.66 1333 E6750 2.66 1333 E6700 2.60 E4700 2.40 1066 E6600 2.33 1066...

  • Page 18: System Memory Support

    1066 1333 8533 Notes: Kontron offers the following memory modules: · P/N 1028-6891, DDR3-RAM, 1GB, 240p, 800MHZ, PC3-8500, DIMM · P/N 1028-6892, DDR3-RAM, 2GB, 240p, 800MHZ, PC3-8500, DIMM · Faster RAM like PC3-10600 can be used but will run at lower speed.
  • Page 19 KTD-00782-H KTQ45 family Page 19 of 92 Channel B will be divided into two parts. One part of channel B is used together with channel A and mapped to dual channel operation. The second part of channel B is mapped to single channel operation. Channel A, DDR3 DIMMA1 (SLOT 1) Channel A, DDR3 DIMMB1 (SLOT 2) Channel B, DDR3 DIMMC1 (SLOT 3)

  • Page 20: Ktq45 Graphics Subsystem

    KTD-00782-H KTQ45 family Page 20 of 92 KTQ45 Graphics Subsystem The KTQ45 boards use the Intel Q45 chipset for the graphical control. This chipset contains two separate, mutually exclusive graphics options. Either the GMA 4500 graphics controller (contained within the AC82Q45 GMCH) is used, or a PCI Express x16 add-in card can be used.

  • Page 21: Add2 Card Support

    PCIe Passive Graphic cards can be designed to support the following configurations: · TMDS for DVI 1.0 · Display Port · HDMI support Currently available Kontron PCIe Passive Graphic cards: · P/N 820977, KT-PCIe-DVI-HDMI-I, (HDMI, and DVI with TMDS option). Please visit the Kontron website (www.kontron.com ) for details.

  • Page 22: Power Consumption

    – refer to the hardware manual for actual power specification. The KTQ45/Flex board is powered through the ATX connector and the additional 12V separate supply for CPU as specified in the ATX specification; besides this the power supplied to the board must be within the ATX specification.
  • Page 23 KTD-00782-H KTQ45 family Page 23 of 92 DOS Idle, Mean, No external load Supply Current draw Power consumption +12V 1.59A 19.08W 1.39A 6.95W +3V3 1.28A 4.224W -12V 5VSB Total 30.254W Windows XP, mean 3DMARK2001 (Game 1 – Car Chase test ) & 2 x CPUBURN Supply Current draw Power consumption...

  • Page 24: Connector Definitions

    KTD-00782-H KTQ45 family Page 24 of 92 Connector Definitions The following sections provide pin definitions and detailed description of all on-board connectors. The connector definitions follow the following notation: Column Description name Shows the pin-numbers in the connector. The graphical layout of the connector definition tables is made similar to the physical connectors.

  • Page 25: Connector Layout

    KTD-00782-H KTQ45 family Page 25 of 92 Connector layout 3.1.1 KTQ45/Flex FRONTPNL Clr-CMOS ATXPWR COM2 JP5* SPI jumper USB8 FEATURE USB9 FAN_SYS Clr-ME Ext-TPM JP3* FAN_CPU PCIe x16/SDVO PCIe x4 CPU Socket PCI Slot 1 PCI Slot 2 KBDMSE ATX+12V-6pin...

  • Page 26: Ktq45/Atxe

    KTD-00782-H KTQ45 family Page 26 of 92 3.1.3 KTQ45/ATXE Connectors are at the same location as on KTQ45/Flex, except for the pointed out connectors. The connectors with FAN_SYS an “*” indicates only available on KTQ45/ATXE. J9, J8, J7* COM4* Ext-TPM...

  • Page 27: Power Connector (Atxpwr)

    KTD-00782-H KTQ45 family Page 27 of 92 Power Connector (ATXPWR) The KTQ45 boards are designed to be supplied from a standard ATX or BTX power supply. ATX/ BTX Power Connector: Note Type Signal Signal Type Note +12V +12V SB5V P_OK PSON# OC -12V Note 1: -5V supply is not used onboard.

  • Page 28: Keyboard And Mouse Connectors

    KTD-00782-H KTQ45 family Page 28 of 92 Keyboard and Mouse connectors Attachment of a keyboard or PS/2 mouse adapter can be done through the stacked PS/2 mouse and keyboard connector (MSE & KBD). Both interfaces utilize open-drain signalling with on-board pull-up. The PS/2 mouse and keyboard is supplied from SB5V when in standby mode in order to enable keyboard or mouse activity to bring the system out from power saving states.

  • Page 29: Display Connector

    KTD-00782-H KTQ45 family Page 29 of 92 Display connector The KTQ45 board family provides onboard Analogue CRT interface. Additionally the KTQ45 boards provides support for ADD2 cards through the onboard PCI Express x16 connector, with extension capability for support of DVI, LVDS, VGA, HDMI/UDI, TV-Out, etc. If a PCI Express x16 Graphics add-in card is used, the onboard Graphics controller (GMA 4500) is disabled.

  • Page 30: Pci-Express Connectors

    KTD-00782-H KTQ45 family Page 30 of 92 PCI-Express connectors The KTQ45 board supports one 16-lane (x16) PCI Express port and one 4-lane PCI Express (x16) port. The 16-lane (x16) PCI Express 2.0 port can be used for external PCI Express graphics card. It is located nearest the CPU.

  • Page 31: Pci-Express X4 Connector (Pcie X4)

    KTD-00782-H KTQ45 family Page 31 of 92 PEG_TXN[8]/SDVOC_CLKP PEG_RXP[8] PRSNT#2 PEG_RXN[8] PEG_TXP[7] PEG_TXN[7] PEG_RXP[7] PEG_RXN[7] PEG_TXP[6] PEG_TXN[6] PEG_RXP[6] PEG_RXN[6] PEG_TXP[5] PEG_TXN[5] PEG_RXP[5] PEG_RXN[5] PEG_TXP[4] PEG_TXN[4] PEG_RXP[4] PEG_RXN[4] PEG_TXP[3] PEG_TXN[3] PEG_RXP[3] PEG_RXN[3] PEG_TXP[2] PEG_TXN[2] PEG_RXP[2] PEG_RXN[2] PEG_TXP[1] PEG_TXN[1] PEG_RXP[1] PEG_RXN[1] PEG_TXP[0] PEG_TXN[0] PEG_RXP[0] PEG_RXN[0]...
  • Page 32 KTD-00782-H KTQ45 family Page 32 of 92 PCIE_RXP[4] PCIE_RXN[4]...

  • Page 33: Serial Ata Hard Disk Interface

    KTD-00782-H KTQ45 family Page 33 of 92 Serial ATA Hard Disk interface The KTQ45 boards have an integrated SATA Host controller that supports independent DMA operation on six ports and data transfer rates of up to 3.0Gb/s (300MB/s). The SATA controller supports AHCI mode and has integrated RAID functionality with support for RAID modes 0, 1, 5 and 10 (Linux O/S only support for RAID 0 and 1).

  • Page 34: Printer Port Connector (Lpt)

    KTD-00782-H KTQ45 family Page 34 of 92 Printer Port Connector (LPT) The signal definition in standard printer port mode is as follows: Pull Pull Note Ioh/Iol Type Signal PIN Signal Type Ioh/Iol Note 2K2 (24)/24 OC(O) STB# AFD# OC(O) (24)/24 2K2 2K2 24/24 ERR# 2K2 24/24...

  • Page 35: Serial Ports

    Page 35 of 92 Serial Ports Two RS232 serial ports are available on the KTQ45/Flex. Three RS232 serial ports and one RS485 port are available on the KTQ45/ATXE. The typical definition of the signals in the COM ports is as follows:...

  • Page 36: Com2 And Com3 Header Connectors

    Jumper JP7 and JP9. The transmitter termination resistor can be disabled by removing Jumper JP8. If using Kontron PN 821016 or PN 821017 as DB9 adapter (ribbon cable) then the pinout is as follows: Pull...

  • Page 37: Ethernet Connectors

    KTD-00782-H KTQ45 family Page 37 of 92 Ethernet Connectors The KTQ45 boards supports 2 channels of 10/100/1000Mb Ethernet one based on Intel® Boazman-LM WG82567LM Gigabit PHY with AMT 5.0 support (ETHER1) and the other based on Intel® Hartwell 82574L PCI Express controller (ETHER2). In order to achieve the specified performance of the Ethernet port, Category 5 twisted pair cables must be used with 10/100MB and Category 5E, 6 or 6E with 1Gb LAN networks.

  • Page 38: Usb Connectors (Usb)

    KTD-00782-H KTQ45 family Page 38 of 92 3.10 USB Connectors (USB) The KTQ45 board contains two Enhanced Host Controller Interface (EHCI) host controllers that support USB 2.0 allowing data transfers up to 480Mb/s. The KTQ45 boards also contains Six Universal Host Controller Interface (UHCI Revision 1.1) controllers that support USB full-speed and low-speed signalling.

  • Page 39: Usb Connector 4/5 (Usb4/5)

    KTD-00782-H KTQ45 family Page 39 of 92 3.10.2 USB Connector 4/5 (USB4/5) USB Ports 4 and 5 are mounted together with ETHER1 Ethernet port. Pull Pull Note Ioh/Iol Type Signal Signal Type Ioh/Iol Note 5V/SB5V /15K 0.25/2 USB5- USB5+ 0.25/2 /15K 5V/SB5V /15K...

  • Page 40: Usb Connector 8/9 (Usb8/9)

    KTD-00782-H KTQ45 family Page 40 of 92 3.10.4 USB Connector 8/9 (USB8/9) USB Ports 8 and 9 are supplied on the internal USBC1 pinrow connector. Pull Pull Note Ioh/Iol Type Signal Signal Type Ioh/Iol Note PWR 5V/SB5V 5V/SB5V PWR - USB8- USB9- USB8+...

  • Page 41: Audio Connectors

    KTD-00782-H KTQ45 family Page 41 of 92 3.11 Audio Connectors The onboard Audio circuit implements 7.1+2 Channel High Definition Audio with UAA (Universal Audio Architecture), featuring five 24-bit stereo DACs and three 20-bit stereo ADCs. 3.11.1 Audio Speakers, Line-In, Line-Out and Microphone Audio Speakers, Line-in, Line-out and Microphone are available in the stacked audio jack connector.

  • Page 42: Cdrom Audio Input (Cdrom)

    KTD-00782-H KTQ45 family Page 42 of 92 3.11.2 CDROM Audio Input (CDROM) CD-ROM audio input may be connected to this connector. It may also be used as a secondary line-in signal. Pull Signal Type Ioh/Iol Note CD_Left CD_GND CD_GND CD_Right Note 1: The definition of which pins are use for the Left and Right channels is not a worldwide accepted standard.

  • Page 43: Audio Header (Audio_Head)

    KTD-00782-H KTQ45 family Page 43 of 92 3.11.3 Audio Header (AUDIO_HEAD) Pull Ioh/ Ioh/ Pull Note Type Signal Signal Type Note LFE-OUT CEN-OUT AAGND AAGND FRONT-OUT-L FRONT-OUT-R AAGND AAGND REAR-OUT-L REAR-OUT-R SIDE-OUT-L 11 12 SIDE-OUT-R AAGND 13 14 AAGND MIC1-L 15 16 MIC1-R AAGND...

  • Page 44: Fan Connector (Fan_Cpu)

    KTD-00782-H KTQ45 family Page 44 of 92 3.12 Fan Connector (FAN_CPU) The FAN_CPU is used for the connection of the FAN for the CPU. The FAN_SYS can be used to power, control and monitor a fan for chassis ventilation etc. The 4pin header supports connection of 3-pin FAN, but it is recommended to use the 4-pin type for optimized FAN speed control.

  • Page 45: Clear Cmos Jumper (Clr-Cmos /Jbat1)

    KTD-00782-H KTQ45 family Page 45 of 92 3.13 Clear CMOS Jumper (Clr-CMOS /JBAT1) The Clr-CMOS Jumper is used to clear the CMOS content. · Jumper in Clear CMOS position (only for 1 minute) · Jumper normal position <-- pin 1 SATA1 connector To clear all CMOS settings, including Password protection, move the Clr-CMOS jumper to pin 2-3 for 1 minute (Works with or without power connected to the system).

  • Page 46: Tpm Connector (Tpm)

    KTD-00782-H KTQ45 family Page 46 of 92 3.17 TPM Connector (TPM) This connector is unsupported. Pull Pull Note Ioh/Iol Type Signal Signal Type Ioh/Iol Note PWR LPC CLK PWR LPC FRAME# LPC RST# LPC AD3 LPC AD2 +3V3 LPC AD1 LPC AD0 11 12 SMB_CLK...

  • Page 47: Front Panel Connector (Frontpnl)

    KTD-00782-H KTQ45 family Page 47 of 92 3.19 Front Panel Connector (FRONTPNL) Pull Ioh/ Ioh/ Pull Note Type Signal Signal Type Note USB10/11_5V USB10/11_5V USB1- USB3- USB1+ USB3+ PWR GND PWR - LINE2-IN-L PWR +5V 11 12 PWR - HD_LED 13 14 SUS_LED PWR GND...

  • Page 48: Feature Connector (Feature)

    KTD-00782-H KTQ45 family Page 48 of 92 3.20 Feature Connector (FEATURE) Pull Ioh/ Ioh/ Pull Note Type Signal Signal Type Note INTRUDER# PWR - EXT_ISAIRQ# EXT_SMI# I 4K7 3 PWR_OK SB5V PWR - PWR SB3V3 EXT_BAT PWR - PWR +5V PWR - 4K7/ /12mA IOT GPIO0...

  • Page 49: Pci Slot Connector (Pci Slot)

    KTD-00782-H KTQ45 family Page 49 of 92 3.21 PCI Slot Connector (PCI Slot) Terminal Note Type Signal Signal Type Note PWR -12V TRST# +12V PWR GND PWR +5V PWR +5V INTA# INTB# INTC# INTD# REQ2# CLKC REQ3# +5V (I/O) PWR GNT2# CLKD PWR GND...

  • Page 50: Signal Description - Pci Slot Connector

    KTD-00782-H KTQ45 family Page 50 of 92 3.21.1 Signal Description – PCI Slot Connector SYSTEM PINS Clock provides timing for all transactions on PCI and is an input to every PCI device. All other PCI signals, except RST#, INTA#, INTB#, INTC#, and INTD#, are sampled on the risingedge of CLK and all other timing parameters are defined with respect to this edge.

  • Page 51: Ktq45 Pci Irq & Int Routing

    Interrupt D is used to request an interrupt and only has meaning on a multi-function device. INTD# 3.21.2 KTQ45 PCI IRQ & INT routing Board type Slot IDSEL INTA INTB INTC INTD KTQ45/Flex AD16 INT_PIRQ#A INT_PIRQ#B INT_PIRQ#C INT_PIRQ#D AD17 INT_PIRQ#B INT_PIRQ#G INT_PIRQ#H INT_PIRQ#E KTQ45/ATXE...

  • Page 52: Onboard Connectors And Mating Connectors

    KBDMSE Molex 22-23-2061 Molex 22-01-2065 CDROM Foxconn HF1104E Molex 50-57-9404 Molex 70543-0038 SATA Hon Hai LD1807V-S52T Molex 67489-8005 Kontron KT 821035 (cable kit) ATXPWR Molex 43045-1201 Molex 43025-1200 ATX+12V-4pin Molex 22-23-2041 Molex 22-01-2046 ATX+12V-6pin Molex 22-23-2041 Molex 22-01-2046 COM2, 3, 4...

  • Page 53: System Resources

    KTD-00782-H KTQ45 family Page 53 of 92 System Resources Memory Map Address (hex) Size Description 00000000 0009FFFF 655360 System board 000A0000 000BFFFF 131072 PCI-bus 000A0000 000BFFFF 131072 Intel(R) Q45/Q43 Express Chipset 000C0000 000CFFFF 65536 System board 000D0000 000DFFFF 65536 PCI-bus 000E0000 000FFFFF 131072...

  • Page 54: Pci Devices

    KTD-00782-H KTQ45 family Page 54 of 92 PCI Devices Device Function Vendor Device Chip Device Function 8086 10DE 82567LM-3 Gigabit Network Connection 8086 10D3 82574L Gigabit Network Connection 8086 244E 82801JB ICH10 I/O Controller Hub 10 8086 3A06 82801JB ICH10 2-port SATA Controller 8086 3A00...

  • Page 55: Interrupt Usage

    KTD-00782-H KTQ45 family Page 55 of 92 Interrupt Usage Notes IRQ0 IRQ1 IRQ2 IRQ3 IRQ4 IRQ5 IRQ6 IRQ7 IRQ8 IRQ9 IRQ10 IRQ11 IRQ12 IRQ13 IRQ14 IRQ15 IRQ16 IRQ17 IRQ18 IRQ19 IRQ20 IRQ21 IRQ22 IRQ23 IRQ24 IRQ25 IRQ26...

  • Page 56: Io Map

    KTD-00782-H KTQ45 family Page 56 of 92 IO Map Address range (hex) Size Description 000F DMA-controller 0CF7 3320 PCI-bus 001F Motherboard resources Programmable interrupt controller 003F Motherboard resources System timer 005F Motherboard resources Standard keyboard System Speaker Motherboard resources Standard keyboard 006F Motherboard resources System CMOS/Real time clock...

  • Page 57: Overview Of Bios Features

    Enabled and follow the operating system’s installation instructions. BIOS Update The BIOS can be updated using Kontron utility called bf.exe, which are available on the Kontron Web site. The utility supports DOS and Windows environment. Before updating the BIOS, AMT related restrictions must be followed.

  • Page 58: Bios Configuration/Setup

    KTD-00782-H KTQ45 family Page 58 of 92 BIOS Configuration/Setup Introduction The BIOS Setup is used to view and configure BIOS settings for the KTQ45 board. The BIOS Setup is accessed by pressing the DEL key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins.

  • Page 59: Advanced Menu

    KTD-00782-H KTQ45 family Page 59 of 92 Advanced Menu BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit Advanced Settings Configure CPU. Warning: Setting wrong values in below sections may cause system to malfunction. ► CPU Configuration ► IDE Configuration ►...

  • Page 60: Advanced Settings - Cpu Configuration

    KTD-00782-H KTQ45 family Page 60 of 92 6.6.1 Advanced settings – CPU Configuration BIOS SETUP UTILITY Advanced CPU Configure Disabled for WindowsXP Module Version: 3F.14 Manufacturer:Intel Intel® Core ™2 CPU Q9650 @ 3.0Ghz Frequency : 3.00Ghz FSB Speed : 1332Mhz Cache L1 : 128 KB Cache L2...

  • Page 61: Third Ide Master

    KTD-00782-H KTQ45 family Page 61 of 92 6.6.2 Advanced settings – IDE Configuration BIOS SETUP UTILITY Advanced IDE Configuration Options Disabled Compatible Mirrored IDER Configuration [Disabled] Enhanced Configure SATA#1 as [SATA] ► Primary IDE Master : [Hard Disk] ► Primary IDE Slave : [Not Detected] ►...
  • Page 62 KTD-00782-H KTQ45 family Page 62 of 92 BIOS SETUP UTILITY Advanced Primary IDE Master Select type devices connected to the system Device :Hard Disk Vendor :ST340014A Size :40.0GB LBA Mode :Supported Block Mode :16Sectors PIO Mode Async DMA :MultiWord DMA-2 Ultra DMA :Ultra DMA-5 S.M.A.R.T.
  • Page 63 KTD-00782-H KTQ45 family Page 63 of 92 BIOS SETUP UTILITY Advanced AHCI Settings Enables for supporting AHCI BIOS Support [Enabled] ► AHCI Port0 [Not Detected] ► AHCI Port1 [Not Detected] ► AHCI Port2 [Not Detected] ► AHCI Port3 [Not Detected] ►...

  • Page 64: Advanced Settings - Lan Configuration

    KTD-00782-H KTQ45 family Page 64 of 92 6.6.3 Advanced settings – LAN Configuration BIOS SETUP UTILITY Advanced LAN Configuration Control Ethernet Devices and PXE boot ETH1 Configuration (Right) [Enabled] MAC Address & Link status : 00E0F41E24A4 + ETH2 Configuration (Left) [Enabled] MAC Address &...

  • Page 65: Advanced Settings - Configure Win627Dhg Super Io Chipset

    KTD-00782-H KTQ45 family Page 65 of 92 6.6.4 Advanced settings – Configure Win627DHG Super IO Chipset BIOS SETUP UTILITY Advanced Configure Win627DHG Super IO Chipset Allows BIOS Select Serial Port1 Base Addresses. Serial Port1 Address [3F8/IRQ4] Serial Port2 Address [2F8/IRQ3] Serial Port2 Mode [Normal] Parallel Port Address...
  • Page 66 KTD-00782-H KTQ45 family Page 66 of 92 Feature Options Description Disabled Serial Port3 Address Allows BIOS to select Serial Port3 Base Addresses (The available options depend on the setup for the other Serial Ports). Serial Port3 IRQ IRQ3 Allows BIOS to select Serial Port3 IRQ. IRQ4 IRQ10 (The available options depend on the setup for the...

  • Page 67: Advanced Settings - Hardware Health Configuration

    KTD-00782-H KTQ45 family Page 67 of 92 6.6.5 Advanced settings – Hardware Health Configuration BIOS SETUP UTILITY Advanced Hardware Health Configuration Disable = Full Speed Thermal: Does regulate System Temperature :48ºC/118ºF speed according CPU Temperature :56ºC/132ºF specified temperature VTIN Temperature :N/A Speed: Does...

  • Page 68: Advanced Settings - Voltage Monitor

    KTD-00782-H KTQ45 family Page 68 of 92 6.6.6 Advanced settings – Voltage Monitor BIOS SETUP UTILITY Advanced Voltage Monitor Requested Core CPU :1.25000 V CPU Vccp :1.240 V AVCC :3.248 V 3VCC :3.248 V P12V :11.800 V -12Vin :Good :5.016 V DDR1V5 :1.528 V P1V5...

  • Page 69: Advanced Settings - Acpi Settings

    KTD-00782-H KTQ45 family Page 69 of 92 6.6.7 Advanced settings – ACPI Settings BIOS SETUP UTILITY Advanced ACPI Settings Select ACPI state used for System Suspend. Suspend mode [S3 (STR)] Repost Video on S3 Resume [No] ACPI Version Features [ACPI v1.0] PS/2 Kbd/Mouse S4/S5 Wake [Disabled] Keyboard Wake Hotkey...

  • Page 70: Advanced Settings - Intel Amt Configuration

    KTD-00782-H KTQ45 family Page 70 of 92 6.6.8 Advanced settings – Intel AMT Configuration BIOS SETUP UTILITY Advanced Configuration Intel AMT Parameters Options Disabled Enabled Intel AMT Support [Enabled] Force IDER [Disabled] Force SOL [Disabled] Unconfigure AMT/ME [Disabled] Active Remote Assistance [Disabled] <->...

  • Page 71: Advanced Settings - Intel Vt-D Configuration

    KTD-00782-H KTQ45 family Page 71 of 92 6.6.9 Advanced settings – Intel VT-d Configuration BIOS SETUP UTILITY Advanced Intel VT-d Configuration Options Disabled Enabled Intel VT-d [Disabled] <-> Select Screen Select Item change option General Help Save and Exit Exit v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

  • Page 72: Advanced Settings - Remote Access Configuration

    KTD-00782-H KTQ45 family Page 72 of 92 6.6.10 Advanced settings – Remote Access Configuration BIOS SETUP UTILITY Advanced Configure Remote Access type and parameters Select Remote Access type. Remote Access [Enabled] Serial port number [COM1] Base Address, IRQ [3F8h, 4] Serial Port Mode [115200 8,n,1] Flow Control...

  • Page 73: Advanced Settings - Trusted Support

    KTD-00782-H KTQ45 family Page 73 of 92 6.6.11 Advanced settings – Trusted Support BIOS SETUP UTILITY Advanced Trusted Computing Enables/Disable (Tpm 1.1/1.2) Support in Bios TCG/TPM Support [Yes] Execute TPM Command [Don’t change] TPM Enabled/Disabled Status [No State] TPM Owner Status [No State] <->...

  • Page 74: Usb Mass Storage Device Configuration

    KTD-00782-H KTQ45 family Page 74 of 92 6.6.12 Advanced settings – USB Configuration BIOS SETUP UTILITY Advanced USB Configuration Enables support legacy USB. AUTO option disables Module Version – 2.24.5-13.4 Devices are connected. USB Devices Enabled : 1 Drive Legacy USB Support [Enabled] USB 2.0 Controller Mode [HiSpeed]...

  • Page 75: Advanced Settings - Usb Mass Storage Device Configuration

    KTD-00782-H KTQ45 family Page 75 of 92 6.6.13 Advanced settings – USB Mass Storage Device Configuration BIOS SETUP UTILITY Advanced USB Mass Storage Device Configuration Number seconds POST waits USB mass storage device after USB Mass Storage Reset Delay [20 Sec] start unit command.

  • Page 76: Pcipnp Menu

    KTD-00782-H KTQ45 family Page 76 of 92 PCIpnp Menu BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit Advanced PCI/PnP Settings Yes: Assigns IRQ to PCI card card requests IRQ. Warning: Setting wrong values in below sections No: Does not assign IRQ May cause system to malfunction.

  • Page 77: Boot Menu

    KTD-00782-H KTQ45 family Page 77 of 92 Boot Menu BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit Boot Settings Configure Settings during System Boot. ► Boot Settings Configuration ► Boot Device Priority <-> Select Screen Select Item Enter Go to Sub Screen General Help Save and Exit Exit...

  • Page 78: Boot - Boot Settings Configuration

    KTD-00782-H KTQ45 family Page 78 of 92 6.8.1 Boot – Boot Settings Configuration BIOS SETUP UTILITY Boot Boot Settings Configuration Allows BIOS skip certain tests while booting order Quick Boot [Enabled] decrease boot time. Quiet Boot [Disabled] AddOn ROM Display Mode [Force BIOS] <->...

  • Page 79: Boot - Boot Device Priority

    KTD-00782-H KTQ45 family Page 79 of 92 6.8.2 Boot – Boot Device Priority BIOS SETUP UTILITY Boot Boot Device Priority Specifies boot sequence from available devices. 1st Boot Device [ESS-ST380811AS] device enclosed parenthesis been disabled corresponding type menu. <-> Select Screen Select Item Enter Go to Sub Screen General Help...

  • Page 80: Security Menu

    KTD-00782-H KTQ45 family Page 80 of 92 Security Menu BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit Security Settings Install Change password. Supervisor Password :Not Installed User Password :Not Installed Change Supervisor Password Change User Password <-> Select Screen Select Item Enter Go to Sub Screen General Help...
  • Page 81 KTD-00782-H KTQ45 family Page 81 of 92 Supervisor Password protection (setup Supervisor before User) Super- visor BIOS User Access control Full Date&Time * Supervisor PSW CMOS (most) View User Limit None * = also: Quick Boot Quiet Boot Repost Video on S3 Resume Active State Power-Management User Password protection only (no Supervisor Password used) CMOS...

  • Page 82: Chipset Menu

    KTD-00782-H KTQ45 family Page 82 of 92 6.10 Chipset Menu BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit Advanced Chipset Settings Configures North Bridge features. Warning: Setting wrong values in below sections may cause system to malfunction. ► North Bridge Configuration ►...

  • Page 83: Video Function Configuration

    KTD-00782-H KTQ45 family Page 83 of 92 6.10.1 Advanced Chipset Settings – North Bridge Chipset Configuration BIOS SETUP UTILITY Chipset North Bridge Chipset Configuration ENABLE: Allow remapping of overlapped PCI memory above the total physical Memory Remap Feature [Disabled] memory. PCI MMIO Allocation: 4GB to 4428MB Memory Hole [Disabled]...

  • Page 84: Advanced Chipset

    KTD-00782-H KTQ45 family Page 84 of 92 6.10.2 Advanced Chipset … – North Br. … – Video Function Configuration BIOS SETUP UTILITY Chipset Video Function Configuration Options Fixed Mode DVMT Mode DVMT Mode Select [DVMT Mode] DVMT/FIXED Memory [256MB] Flat Panel Type [Type 3] Backlight Control Support [VBIOS-Default]...
  • Page 85 KTD-00782-H KTQ45 family Page 85 of 92 Feature Options Description DVMT Mode Select Fixed Mode Fixed Mode DVMT Mode DVMT Mode DVMT/FIXED Memory 128MB This setting is only 256MB Maximum DVMT Type 1, 2, 3, 4 ...16 Flat Panel Type Type 1,2,3 to 16 Backlight Control Support VBIOS-Default...

  • Page 86: Advanced Chipset Settings - South Bridge Chipset Configuration

    KTD-00782-H KTQ45 family Page 86 of 92 6.10.3 Advanced Chipset Settings – South Bridge Chipset Configuration BIOS SETUP UTILITY Chipset South Bridge Chipset Configuration Disabled 2 USB Ports 4 USB Ports USB Functions [8 USB Ports] 6 USB Ports USB Port Configure [6x6 USB Ports] 8 USB Ports USB 2.0 Controller...

  • Page 87: Advanced Chipset Settings - Me Subsystem Configuration

    KTD-00782-H KTQ45 family Page 87 of 92 6.10.4 Advanced Chipset Settings – ME Subsystem Configuration BIOS SETUP UTILITY Chipset ME Subsystem Configuration Disabled Enabled BootBlock HECI Message [Enabled] HECI Message [Enabled] End of Post S5 HECI Message [Enabled] ME HECI configuration ME-HECI [Enabled] <->...

  • Page 88: Advanced Chipset Settings - Ve Subsystem Configuration

    KTD-00782-H KTQ45 family Page 88 of 92 6.10.5 Advanced Chipset Settings – VE Subsystem Configuration BIOS SETUP UTILITY Chipset VE Subsystem Configuration Enabled/Disable VECI Messaging VE-VECI [Disabled] Unhide All Physical HC [Enabled] <-> Select Screen Select Item Enter Go to Sub Screen General Help Save and Exit Exit...

  • Page 89: Advanced Chipset Settings - Spread Spectrum Control

    KTD-00782-H KTQ45 family Page 89 of 92 6.10.6 Advanced Chipset Settings – Spread Spectrum Control BIOS SETUP UTILITY Chipset Clock Synthesizer Setting Options Disabled Enabled PLL1 spread [Disabled] CLK & 27M_SS spread [Disabled] <-> Select Screen Select Item Enter Go to Sub Screen General Help Save and Exit Exit...

  • Page 90: Exit Menu

    KTD-00782-H KTQ45 family Page 90 of 92 6.11 Exit Menu BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit Exit Options Exit system setup after saving the changes. Save Changes and Exit F10 Key can be used for Discard Changes and Exit this operation.

  • Page 91: Ami Bios Beep Codes

    KTD-00782-H KTQ45 family Page 91 of 92 AMI BIOS Beep Codes Boot Block Beep Codes: Number Description Beeps Insert diskette in floppy drive A: ‘AMIBOOT.ROM’ file not found in root directory of diskette in A: Base Memory error Flash Programming successful Floppy read error Keyboard controller BAT command failed No Flash EPROM detected...

  • Page 92: Os Setup

    Warranty KONTRON Technology warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, KONTRON Technology will, at its sole option, repair or replace the product with a similar product.

This manual is also suitable for:

Ktq45/atxe

Table of Contents