KTD-N0819-K
•
Hardware
Smart Fan control system, support Thermal® and Speed® cruise for two on-board
Monitor
Fan connectors: CPU Fan (on-board) and System Fan (on-board)
•
Subsystem
Smart Fan control system, support Speed® cruise for two off-board Fans
(Fan3/Fan4) via Feature Connector.
•
Three thermal inputs: CPU Die temperature (precision +/- 3ºC), System
temperature (precision +/- 3ºC) and System Temperature External via Feature
Connector (precision +/- 1ºC).
•
Voltage monitoring
•
Intrusion (Case Open) detect input, (via Feature connector)
•
Sleep S5# Indication, (via Feature connector)
•
System Powergood Signal, (via Feature connector)
Power
ATX/BTX (w. ATX+12V) PSU for full PCI/PCIe load.
Supply Unit
Alternatively (mITX version only): +12V single supply via ATX+12V (4-pole) connector,
but with limitation to power load (especially +5V for USB).
Battery
Exchangeable 3.0V Lithium battery for on-board Real Time Clock and CMOS RAM.
Manufacturer Panasonic / Part-number CR-2032L/BN, CR2032N/BN or CR-2032L/BE.
Approximate 6.2 years retention.
Current draw is 4.1µA when PSU is disconnected and 0 µA in S0 – S5.
CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
•
BIOS
Kontron Technology / AMI BIOS (EFI core version)
•
Support for ACPI 3.0 ( Advanced Configuration and Power Interface), Plug & Play
o
o
o
•
"Always On" BIOS power setting
•
RAID Support (RAID modes 0,1, 5 and 10)
•
Operating
WinXP (32b + 64b *)
•
Systems
Vista (32b * + 64b *)
•
Support
Windows 7 (32b + 64b *)
•
Linux
•
VxWorks
•
Windows Server 2003 r2 (32b * + 64b *)
•
Windows Server 2008 r2 (32b * + 64b *)
•
WES7 (32b + 64b)
*= Out Of The Box installation test only.
Page 12
Suspend (S1 mode)
Suspend To Ram (S3 mode)
Suspend To Disk (S4 mode)
System Specification
KTQM67 Users Guide