Io-Area Connectors; Display Connectors (Io Area); Dvi Connector (Dvi-I) (J41) - Kontron KTQM67/mITX User Manual

KTD-N0819-K

5 IO-Area Connectors

5.1 Display connectors (IO Area)

The KTQM67 family provides one on-board DVI-I port (both digital and analogue), two on-board DP's
(DisplayPort), one on-board eDP (Embedded DisplayPort) and one on-board LVDS panel interface. Two
graphic pipes are supported; meaning that up to two independent displays can be implemented using
any two of the above mentioned graphic ports.
.

5.1.1 DVI Connector (DVI-I) (J41)

The DVI-I connector support DVI Digital output and DVI Analogue output.
Signal Description - DVI Connector:
Pin Signal
1 TMDS Data 2-
2 TMDS Data 2+
3 TMDS Data 2/4 Shield
4 NC
5 NC
6 DDC Clock
7 DDC Data
8 NC
9 TMDS Data 1-
10 TMDS Data 1+
11 TMDS Data 1/3 Shield
12 NC
13 NC
14 +5V
15 GND
16 Hot Plug Detect
17 TMDS Data 0-
18 TMDS Data 0+
19 TMDS Data 0/5 Shield
20 NC
21 NC
22 TMDS Clock Shield
23 TMDS Clock+
24 TMDS Clock-
C1 ANALOG RED
C2 ANALOG GREEN
C3 ANALOG BLUE
C4 ANALOG HSYNC
C5 ANALOG GND
C6 ANALOG GND
Note: The +5V supply is fused by a 1.1A resettable fuse
Page 37
Female socket, front view
Description
Digital Red – (Link 1)
Digital Red + (Link 1)
DDC Clock
DDC Data
Digital Green – (Link 1)
Digital Green + (Link 1)
Power for monitor when in standby
Hot Plug Detect
Digital Blue – (Link 1) / Digital sync
Digital Blue + (Link 1) / Digital sync
Digital clock + (Link 1)
Digital clock - (Link 1)
Analog output carrying the red color signal
Analog output carrying the green color signal
Analog output carrying the blue color signal
CRT horizontal synchronization output.
Ground reference for RED, GREEN, and BLUE
Ground reference for RED, GREEN, and BLUE
IO-Area Connectors
Type Pull U/D
LVDS OUT
LVDS OUT
PWR
NC
NC
IO 2K2
IO 2K2
NC
LVDS OUT
LVDS OUT
PWR
NC
NC
PWR
PWR
I
LVDS OUT
LVDS OUT
PWR
NC
NC
PWR
LVDS OUT
LVDS OUT
O /75R
O /75R
O /75R
O
PWR
PWR
KTQM67 Users Guide