KTD-N0819-K
10.5
Security
Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc.
Main Advanced Chipset Boot
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following range:
Minimum length
Maximum length
Administrator Password
User Password
Password on popup menu
System Mode state
Secure Boot state
Secure Boot
Secure Boot Mode
Image Execution Policy
►
Key Management
►
HDD Security Configuration:
P1:ST3120827AS
Version 2.15.1226. Copyright © 2012 American Megatrends, Inc
Function
Administrator Password
User Password
Password on popup menu
Secure Boot
Secure Boot Mode
Page 142
Security
Save & Exit
3
20
[Enabled]
Setup
Disabled
[Enabled]
[Custom]
Selection
(See Password
description above)
(See Password
description above)
Disabled
Enabled
Disabled
Enabled
Standard
Custom
Set Administrator Password
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
░
░
░
░
Description
Set Administrator Password
Set User Password
Password on F7 popup boot menu.
Secure Boot flow control.
Secure Boot is possible only if System runs in
User Mode.
Secure Boot mode selector.
Standard: fixed Secure boot policy.
Custom: changeable Image Execution policy
and Secure Boot Key databases.
KTQM67 Users Guide
BIOS -Security