Kontron KTQM67/mITX User Manual page 128

KTD-N0819-K
Function
Primary IGFX Boot Display
LCD Panel Type
SDVO-LFP Panel Type
Panel Scaling
Backlight Control
BIA
Spread Spectrum clock
Chip
Page 128
Selection
VBIOS Default
CRT (DVI-A, default 1)
EFP (DVI-D, default 1)
LFP (LVDS display)
EFP3 (DP2 display)
EFP2 (DP1, default 2)
LFP2
VBIOS Default
640x480 LVDS
800x600 LVDS
1024x768 LVDS1
1280x1024 LVDS
1400x1050(RB) LVDS1
1400x1050 LVDS2
1600x1200 LVDS
1366x768 LVDS
1680x1050 LVDS
1920x1200 LVDS
1440x900 LVDS
1600x900 LVDS
1024x768 LVDS2
1280x800 LVDS
1920x1080 LVDS
2048x1536 LVDS
VBIOS Default
1024x768 SDVO-LFP
1280x1024 SDVO-LFP
1400x1050 SDVO-LFP
1600x1200 SDVO-LFP
Auto
Off
Force Scaling
PWM Inverted
PWM Normal
GMBus Inverted
GMBus Normal
Auto
Disabled
Level 1
Level 2
Level 3
Level 4
Level 5
Off
Hardware
Software
BIOS - Chipset
Description
Select the Video Device which will be
activated during POST.
This has no effect if external graphics
present.
Secondary boot display selection will
appear based on your selection.
VGA modes will be supported only on
primary display.
Select LCD panel used by Internal
Graphics Device by selecting the
appropriate setup item.
Select SDVO panel used by Internal
Graphics Device by selecting the
appropriate setup item.
Select the LCD panel scaling option used
by Internal Graphics Device.
Backlight Control Setting
Auto: GMCH use VBT defaults.
Level n: Enabled with selected
Aggressiveness
Level.
Hardware: Spread is controlled by chip.
Software: Spread is controlled by BIOS.
KTQM67 Users Guide