Io-Area Connectors; Dp Connectors (Dp0, Dp1, Dp2) - Kontron KTH81/mITX User Manual

KTD-N0882-I
6

IO-Area Connectors

DP Connectors (DP0, DP1, DP2)

6.1
The DP (DisplayPort) connectors are based on standard DP type Foxconn 3VD51203-H7JJ-7H or similar.
Note that DP2 only available on KTQ87.
19
20 18
Pin Signal Description
1 Lane 0 (p)
2 GND
3 Lane 0 (n)
4 Lane 1 (p)
5 GND
6 Lane 1 (n)
7 Lane 2 (p)
8 GND
9 Lane 2 (n)
10 Lane 3 (p)
11 GND
12 Lane 3 (n)
Aux or DDC
13 Config1
selection
14 Config2 (Not used)
Aux Channel (+)
15 Aux Ch (p)
or DDC Clk
16 GND
Aux Channel (-)
17 Aux Ch (n)
or DDC Data
18 Hot Plug
19 Return
20 3.3V
Page 33
17 15 13
16 14 12
Type Note
LVDS
PWR
LVDS
LVDS
PWR
LVDS
LVDS
PWR
LVDS
LVDS
PWR
LVDS
Internally pull down (1Mohm).
I Aux channel on pin 15/17 selected as default (when NC)
DDC channel on pin 15/17, If HDMI adapter used (3.3V)
O Internally connected to GND
AUX (+) channel used by DP
DDC Clk used by HDMI
PWR
AUX (-) channel used by DP
DDC Data used by HDMI
I Internally pull down (100Kohm).
PWR Same as GND
PWR Fused by 1.5A resetable PTC fuse.
KTQ87/KTH81 Users Guide
11 9 7 5
10 8 6
IO-Area Connectors
3 1
4 2