Wireless Bridge - Comtrend Corporation CT-5361 User Manual

MAC Address
7.1.3

Wireless Bridge

This page allows you to configure wireless bridge features of the wireless LAN
interface. You can select Wireless Bridge (also known as Wireless Distribution
System) to disable access point functionality. Selecting Access Point enables access
point functionality. Wireless bridge functionality will still be available and wireless
stations will be able to associate to the AP. Select Disabled in Bridge Restrict, which
disables wireless bridge restriction. Any wireless bridge will be granted access.
Selecting Enabled or Enabled (Scan) enables wireless bridge restriction. Only those
bridges selected in Remote Bridges will be granted access.
Option
AP Mode
Bridge Restrict
Lists the MAC addresses subject to the Off, Allow, or Deny
instruction. The Add button prompts an entry field that
requires you type in a MAC address in a two-character,
6-byte convention: xx:xx:xx:xx:xx:xx where xx are
hexadecimal numbers. The maximum number of MAC
addresses that can be added is 60.
Description
Access Point
Wireless Bridge
Enabled
Enabled (Scan)
Disabled
75