Chapter 9 Access By Telnet; Setting A Common Ip Address - Comtrend Corporation CT-535 User Manual

Chapter 9
This chapter will introduce the command line interface using Telnet. The chapter is
divided into two parts. The first part explains how to set the PC and router to the
same network segment, the second part explains how to start a Telnet session.
9.1

Setting a Common IP Address

To log on to the device using Telnet, your workstation and the router should both be
on the same network segment. You can modify the IP address of your PC by
modifying its TCP/IP. Follow the steps below:
STEP 1: Enter the TCP/IP screen and change the IP address to the domain of
192.168.1.x/24. You should choose an IP address from 192.168.1.132-
192.168.1.254 to avoid conflict with IP addresses reserved for the DHCP
pool (192.168.1.3 to 192.168.1.131).
STEP 2: Click OK to submit the settings.
STEP 3: Start Telnet with the default IP address 192.168.1.1.
Access by Telnet
72