Automatically Updating The Clock - Roberts Blutune T2 Manual

Clock and Alarms

Automatically updating the clock

Your radio will usually set the clock time using the DAB signal. You may specify that the
radio sets its clock using signals from the DAB or FM waveband or none. If you choose
none you will need to set the clock manually.
1. With your radio switched on, press Menu.
2. Choose 'System settings', 'Time/Date', 'Auto Update' and then choose an update
option from 'Update from DAB', 'Update from FM' or 'No Update' as required.
If a signal is not found you should then either position the radio or its aerial so that
a signal can be received, or revert to manual clock mode below.
Setting the clock format
The clock display used in Standby mode and on the playing mode screens can be set
to 12 or 24 hour format. The selected format is then also used when setting the alarms.
1. With your radio switched on, press Menu.
2. Choose 'System settings', 'Time/Date', 'Set Format' and then select 12 or 24 hour.
The current clock display format is marked with a tick.
If the 12 hour clock format is chosen, the radio will then use the 12 hour clock for the
setting of alarms, and will display a 12 hour clock with an AM or PM indicator when in
Standby mode.
Setting the clock manually
Normally your radio will set its clock automatically using the DAB radio signal. If no DAB
signal is available and you need to set the time manually, please follow the procedure
shown below.
1. With your radio switched on, press Menu.
2. Choose 'System settings', 'Time/Date', 'Set Time/Date' and then select the desired
day, month, year, hour and minute setting.
3. Press Tuning to confirm the time setting.
System settings
Time/Date
Brightness
Language
Snooze
Menu Alarms
Factory reset
Tuning
Auto Update
Update from DAB
Update from FM
No Update
Set Format
Select / Info / Snooze
12
24
Time/Date
Set Time/Date
Set Format
Auto Update
Clock Style
Set Time/Date
31 -05-2017
16:04
22