Automatically updating the clock
1. Press the On / Standby button to switch on the radio.
2. Press the Menu button to enter the setup menu.
3. Press the Tuning Up or Down buttons until 'Clock' appears on the
display. Press and release the Select button.
4. Press the Tuning Up or Down buttons until 'Auto update' appears on
the display. Press and release the Select button.
5. Press the Tuning Up or Down buttons to choose an update option
from 'Update from Any, 'Update from DAB', 'Update from FM' or 'No
update' as requested. Press and release the Select button to confi rm
your choice.
6. The radio will immediately set its time according to the information
received. The radio will return to the previous menu display.
If no signal is found, "Time is not set" will be displayed. You should then
either position the radio or its aerial so that a signal can be received, or
revert to manual clock mode (see page 37).
39
2
3-5
3-5
3-5