Flowchart On How To Improve Device Signal Levels - EMS FIRECELL Programming Manual

6.2 Flowchart on How to Improve Device Signal Levels

Is there
metalwork / electrical
equipment near the unit
contrary to the device
installation
instructions?
Is the device allocated to the
correct/closest RCC?
Carry Out Survey to re-check
signal levels. Contact EMS
Technical Support
Department for further
advice 0871 2710804
EMS Group Head Office, Technology House, Sea Street, Herne Bay, Kent CT6 8JZ, England
Technical Helpline Tel: +44 (0) 8712 710804
System Programming Manual (Rev2 iss4)
Has the
Device been installed in the
correct location as per the
survey ?
YES
NO
YES
NO
Email:
NO
Re-position the device in
YES
correct location and re-check
signal levels
Are signal
levels now ok ?
YES
Completed
Re-allocate device to correct/
NO
closest RCC and re-check
signal levels
Are signal
levels now ok ?
YES
Completed
enquiries@emsgroup.co.uk Website:www.emsgroup.co.uk
35