Radio Channels - EMS FIRECELL Programming Manual

Firecell system
Hide thumbs Also See for FIRECELL:
Table of Contents

Advertisement

5.6 Radio Channels

This menu allows the frequency channels currently used by the system to be viewed or altered.
NOTE: Alterations to the Radio Hub and RCC communication channels can only be undertaken
when no RCC's are allocated to the system. Alterations to the RCC and Device communication
channels can only be undertaken when no devices are allocated to that particular RCC.
This can be achieved either manually or automatically. Two channels are required to be selected
for the Radio Hub to RCC communication path and two separate channels for the Device to each
RCC communication path. It is not possible to select the same channels for these communication
paths. When selecting the radio channels, one channel must be from the Low Band range and the
other must be from the High Band range. This will ensure a minimum of 100 KHz spacing
between channels. The Radio Channels used to communicate between the Radio Hub and the
RCC's are factory set. It is however recommended that it is re-configured to suit the sites
environment.
This must be performed before any RCC'S are added to the system. The Radio
Channels used to communicate between the Devices and the RCC's are also factory set. It is
however recommended that it is re-configured to suit the sites environment.
performed before any devices are added to the system.
shown in the next section.
Front Display
Radio Channels
32 channels are available for use on the system and these are as follows;
Low Band 1
Ch1:
Ch5:
Ch9:
Ch13: 868.348 MHz
Low Band 2
Ch2:
Ch6:
Ch10: 868.273 MHz
Ch14: 868.373 MHz
Low Band 3
Ch3:
Ch7:
Ch11: 868.298 MHz
Ch15: 868.398 MHz
Low Band 4
Ch4:
Ch8:
Ch12: 868.323 MHz
Ch16: 868.423 MHz
EMS Group Head Office, Technology House, Sea Street, Herne Bay, Kent CT6 8JZ, England
Technical Helpline Tel: +44 (0) 8712 710804
System Programming Manual (Rev2 iss4)
Low Bands
868.047 MHz
868.147 MHz
868.248 MHz
868.072 MHz
868.173 MHz
868.097 MHz
868.198 MHz
868.122 MHz
868.223 MHz
Email:
An example of channel allocation is
High Bands
High Band 1
Ch17: 868.749 MHz
Ch21: 868.849 MHz
Ch25: 868.949 MHz
Ch29: 869.049 MHz
High Band 2
Ch18: 868.774 MHz
Ch22: 868.874 MHz
Ch26: 868.974 MHz
Ch30: 869.075 MHz
High Band 3
Ch19: 868.799 MHz
Ch23: 868.899 MHz
Ch27: 869.000 MHz
Ch31: 869.100 MHz
High Band 4
Ch20: 868.824 MHz
Ch24: 868.924 MHz
Ch28: 869.024 MHz
Ch32: 869.125 MHz
enquiries@emsgroup.co.uk
This must be
Website:www.emsgroup.co.uk
28

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents