How To Improve Signal Levels - EMS FireCell Programming Manual

How To Improve Signal Levels

Device signal levels can be improved by following the owchart below:
electrical equipment
near the unit, contrary to the
device installation
allocated to the
correct/closest
Carry out
re-check
Contact the EMS Technical
Support
further advice.
©2019 EMS Ltd. All rights reserved.
Has the device
been installed in the
correct location as per
the survey?
YES
Is there
metalwork /
instructions?
NO
Is the
device
RCC?
YES
a survey to
signal levels.
department for
Reposition the device
in the correct location
and re-check the signal
levels.
YES
signal levels ok
Signal Levels
successfully
improved.
NO
Re-allocate device to correct
/ closest RCC and re-check
signal levels.
NO
signal levels
Signal Levels
successfully
improved.
Page 39 of 40
NO
Are the
now?
YES
Are
now ok?
YES
MK98 Iss17 05/04/2019 AJM