Rcc Rcc Ch; Device Rcc Ch - EMS FIRECELL Programming Manual

RCC RCC Ch
Once entered, options for currently used, auto select and manual selection of channels will be
available. To check what channels are being used for the RCC to RCC and to the Hub
communication path the currently used menu can be entered and scrolled through to show
Channels currently being used.
Front Display Radio Channels
If the two radio channels are required to be selected automatically the Auto select option should
be selected. This will allow a time duration to be set between 1-60 mins.
frequency channels will be scanned and at the end of the timer the two best channels for use will
be selected. This option must only be undertaken if no RCC's are on the system and is not
allowed if an RCC has already been allocated to the Radio Hub.
Front Display Radio Channels
If the two radio channels are required to be selected manually the Manual select option should be
selected. Care must be taken to select one channel from the High band and one from the Low
band as described in the Radio Channels section.
RCC's are on the system and is not allowed if an RCC has already been allocated to the Radio
Hub.
Front Display Radio Channels
For example:-
Radio Hub to RCC Communication path Low Band Ch1 High Band Ch32
Device RCC Ch
Once entered, options for currently used, auto select and manual selection of channels will be
available. To check what channels are being used for the Device to RCC communication path the
currently used menu can be entered and scrolled through to show Channels currently being used
for each RCC.
Front Display Radio Channels
If the two radio channels are required to be selected automatically the Auto select option should
be selected. This will allow a time duration to be set between 1-60 mins.
frequency channels will be scanned and at the end of the timer the two best channels for use will
be selected. This option can only be undertaken if no Devices are already added to the RCC.
Front Display Radio Channels
If the two radio channels are required to be selected manually the Manual select option should be
selected. Care must be taken to select one channel from the Low band and one from the High
band as described in the Radio Channels section.
Devices are already added to the RCC.
Front Display Radio Channels
For example:-
Device to RCC Communication path Low Band Ch 4 High Band Ch 29
EMS Group Head Office, Technology House, Sea Street, Herne Bay, Kent CT6 8JZ, England
Technical Helpline Tel: +44 (0) 8712 710804
System Programming Manual (Rev2 iss4)
RCC-> RCC Ch Currently Used
RCC-> RCC Ch Auto Select
RCC-> RCC Ch Manual Select
Device-> RCC Ch Currently Used
Device-> RCC Ch Auto Select
Device-> RCC Ch Manual Select
Email: enquiries@emsgroup.co.uk
This option must only be undertaken if no
Select desired RCC number
This option can only be undertaken if no
Website:www.emsgroup.co.uk
In this time the
In this time the
30