Page 2
There are two sections outlined within this document: Section 1 - General maintenance (pages 3 to 4) Section 2 - Two yearly maintenance (pages 5 to 6) If you encounter issues completing the steps outlined in this document, please contact EMS technical support. Kit familiarisation...
Page 3
Section 1 General maintenance Page 3 of 8...
Page 4
Charge the Signal Surveyor Charge the Signal Surveyor (with the left-hand side power switch o ). The unit’s ‘POWER/CHARGE’ will illuminate amber whilst charging and will extinguish once fully charged. Replace the battery if it does not fully charge within 24 hours. See ‘Battery speci cation’...
Page 5
Section 2 Two yearly maintenance CH 1 CH 2 CH 1 CH 2 POWER/ CHARGE RSSI/dB START LOCAL - REMOTE REMOTE - LOCAL Page 5 of 8...
Page 6
Replace all batteries Replace all batteries every two years, observing correct polarity and using only speci ed batteries. See the ‘Speci ed batteries’ section. Mains charger test PASSED It is recommend that the The Signal Surveyor’s Mains Charger is routinely checked every two years App ID: for electrical safety, in accordance with any local codes of practice.
Page 7
Range Test Bench Mark Form Site Location Details Survey Date Background Level Distance Signal Level Comments Page 7 of 8...
Page 8
The information contained within this literature is correct at time of publishing. The EMS Security Group Ltd reserves the right to change any information regarding products as part of its continual development enhancing new technology and reliability. The EMS Group advises that any product literature issue numbers are checked with its head o ce prior to any formal speci cation being written.
Need help?
Do you have a question about the FireCell and is the answer not in the manual?
Questions and answers