Use Reader Config; Launch Reader Config - CipherLab CP55 Reference Manual

CP55 Mobile Computer

2.1. USE READER CONFIG

The mobile computer is capable of reading printed barcodes. The reader module can be a
either a (laser) 1D reader or a 2D imager. The mobile computer is installed with a CipherLab
utility Reader Config to configure the scan engine built inside. Use it to create a profile of
settings that best suits your needs.

2.1.1. LAUNCH READER CONFIG

To launch Reader Config:
1) Tap Start | Settings | System | Reader Configuration
Reader Config launches in context with the reader module(s) on board the mobile
computer. On the main settings page are three sections: General Settings,
Symbology and Miscellaneous.
Click to open
Start Screen
Note: Reader Config will automatically detect the type of reader module integrated on the
mobile computer and adjust its settings accordingly.
The following will guide to settings provided in each of the three sections.
50
Reference Manual
.
Reader Config opens
showing a main menu
with three sections
Click to open option
menu
Click to exit the
application