CP60 Mobile Computer
2.1. CONFIGURE READER
The mobile computer is capable of reading printed barcodes. The reader modules can be a
either a (laser) 1D reader or a 2D imager. The mobile computer is installed with a CipherLab
utility Reader Config to configure the scan engine built inside. Use it to create a profile of
settings that best suits your needs.
2.1.1. LAUNCH READER CONFIG
To launch Reader Config:
1) On Start screen, tap Settings | System | Reader Configuration
Reader Config launches in context with the reader module(s) on board the mobile
computer. The software opens showing a main settings page with three sections:
General Settings, Symbology and Miscellaneous.
Click to open
Start Screen
The following will guide to settings provided in each of the three sections.
64
Reference Manual
.
Reader Config opens
showing a main menu
with three sections
Click to check version
information
Click to exit the
application
Click to open onscreen
keyboard