Configure Reader; Launch Reader Config - CipherLab CP60G Reference Manual

CP60 Mobile Computer (CE)

2.1. CONFIGURE READER

The mobile computer is capable of reading printed barcodes. The reader module can be a
either a (laser) 1D reader or a 2D imager. The mobile computer is installed with a CipherLab
utility Reader Config to configure the scan engine built inside. Use it to create a profile of
settings that best suits your needs.

2.1.1. LAUNCH READER CONFIG

To launch Reader Config:
1) Tap Start | Settings | Control Panel | Reader Configuration
Reader Config launches in context with the reader module(s) on board the mobile
computer. On the main settings page are three sections: General Settings,
Symbology and Miscellaneous.
Opens scan test page for
reading barcodes
Click to open option
menu
Click to open
Start menu
The following will guide to settings provided in each of the three sections.
60
Reference Manual
.
Click to exit the
application
Reader Config opens
showing a main menu
with three sections