CipherLab CP55 Reference Manual page 229

MANAGING MEMBER LIST
The Member List will show all other devices (not including the device under operation) that
have connected to the wireless subnet and are currently running the Push to Talk
application.
OPEN MEMBER LIST
1) Launch Push to Talk as described in
2) Tap Member List on the Push to Talk menu bar to view all members in the current
group.
The number of devices connected to the group will be shown on the Member List label.
Tap Member List again to close the list.
CHECK MEMBER STATUS
In the Member List, a short bar in front of the device name will change its color to indicate
the status of that device. Possible colors are:
Status Mode
Green Voice reception mode
Red Active transmit mode
Yellow Passive transmit mode
Gray Disconnected
Launch Push to
Tap to open Member List
Shows all other devices in the current group
Meaning
Device is connected to the wireless subnet and is currently
running Push to Talk.
Device is transmitting audio message to other devices.
Device is receiving audio message from another device.
Device has been disconnected from the group. Make sure
device has Wi-Fi access, the system hasn't shut down or
entered suspension, and is still running the Push to Talk
application.
Chapter 7 More Applications
Talk.
213