CipherLab CP55 Reference Manual page 228

CP55 Mobile Computer
RECEIVING AUDIO CONTENT
To receive audio content from group members:
1) Have all devices you would like to communicate with connect to a specific (or several
specific) access point(s) as described in
to the same subnet.
2) On all of the devices, launch Push to Talk as described in
Push to Talk opens in voice reception mode.
When another device in the group is sending out audio content, the PUSH button will
become deactivated, and the device name currently transmitting the audio message will
be shown on-screen.
3) As long as Push to Talk is running on the system, it is still open to receive audio
messages from other devices even if it is not the active application onscreen. If you are
working on other tasks or applications, the mobile computer will still receive audio
messages once they are transmitted.
Note: The mobile computer will not be able to receive audio content when the system is
under suspension, or when Wi-Fi has been disconnected.
ASSIGNING OTHER KEYS AS PUSH BUTTON
By default, communication can be done by tapping and holding the PUSH button on-screen.
Alternatively you may assign a physical key to function as the PUSH button. The keys
available for assignment are:
Scan key
Side triggers (Left and right scan keys)
Application key
See Button Assignment
212
Use
for how to re-assign the above physical keys.
Wi-Fi. Make sure these access points belong
Launch Push to
The device sending out audio
content shows on-screen
PUSH button is deactivated and
turns to dark gray
Reference Manual
Talk.