CipherLab CP55 Reference Manual page 265

Discrete 25
Length option
Interleaved 25
Interleaved 25
Length option
Verify Check Digit
Transmit Check Digit
Convert To EAN-13
GS1 DATABAR
GS1 DataBar-14
GS1 DataBar-14
GS1 DataBar Limited
GS1 DataBar Limited
GS1 DataBar Expanded
GS1 DataBar Expanded Checkbox to enable GS1 DataBar Expanded decoding.
Convert to UPC/EAN
Checkbox to enable Discrete 25 decoding.
Sets the length of the Discrete 25 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Checkbox to enable Interleaved 2 of 5 decoding.
Sets the length of the Interleaved 2 of 5 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Decide whether to verify the check digit. If desired, select
one of the algorithms below. If the check digit is incorrect,
the barcode will not be accepted.
Disable
USS Check Digit
OPCC Check Digit
Decide whether to include the check digit in the data being
transmitted.
Convert a 14-character Interleaved 25 barcode into EAN-13
if the following requirements are met:
The barcode must have a leading 0 and a valid EAN-13 check
digit.
Checkbox to enable GS1 DataBar-14 decoding.
Checkbox to enable GS1 DataBar Limited decoding.
Laser (SE955 & SE965HP)
Enable
Max / Min
Length
(4-55)
Enable
Max / Min
Length
(4-55)
Disable
Disable
Disable
Enable
Enable
Enable
249