Insert Sd Card - CipherLab CP55 Reference Manual

CP55 Mobile Computer

1.7.3. INSERT SD CARD

Day-to-day use of the mobile computer might cause the available internal storage to run
short. Equip the mobile computer with an external memory unit to expand storage capacity.
Follow the steps below to install a SD card:
1) Power off the mobile computer.
2) Place the mobile computer face-down on a flat and soft surface.
3) Remove the battery door and main battery pack as described in
4) Locate the SD card socket inside the battery chamber. (See
The SD card socket is equipped with a hinged cover.
Figure 10: Inserting SD Card
36
Main Battery
Inside Battery
5) Push the hinged cover to the "open"
position.
6) The hinged cover is unlocked.
7) Swivel up the hinged cover.
8) Insert the SD card into the cover slot
in the direction indicated
metal contact pins should face down.
9) Put down the hinged cover and push
it back to the "lock" position.
10) Restore the main battery pack and
battery door.
Reference Manual
Setup.
Chamber.)
. The