CipherLab CP55 Reference Manual page 266

CP55 Mobile Computer
Convert to UPC/EAN
MSI
MSI
MSI
Length option
Check Digit Option
Transmit Check Digit
Algorithm
UPC/EAN
EAN-8
EAN-8
EAN-8 Extend
EAN-13
EAN-13
Bookland EAN
Bookland ISBN Format
Transmit Check Digit
250
This only applies to GS1 DataBar-14 and GS1 DataBar
Limited barcodes not decoded as part of a Composite
barcode.
Convert to EAN-13
Strips the leading "010" from barcodes.
The barcode must be composed of a leading "01" as
the application identifier (AI) and a first digit of zero.
Convert to UPC-A
Strips the leading "0100" from barcodes.
The barcode must be composed of a leading "01" as
the application identifier (AI) and two or more zeros
(but not six zeros).
Checkbox to enable MSI decoding.
Sets the length of the MSI symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
One check digit is mandatory for decoding MSI barcodes.
Select whether a second check digit should be verified. If the
check digits are incorrect, the barcode will not be accepted.
One Check Digit
Two Check Digits
Decide whether to include the check digit in the data being
transmitted.
When two check digits are set for verification, two choices
are available for the pair of check digits.
Modulo10 / Modulo11
Double Modulo 10
Checkbox to enable EAN-8 decoding.
Checkbox to enable converting EAN-8 to EAN-13 format.
Checkbox to enable EAN-13 decoding.
Checkbox to enable ISBN decoding. If enabled, select
Bookland ISBN Format in the drop-down box below.
Select to decode Bookland data starting with 978 as 10-digit
format along with the Bookland check digit, or decode
Bookland data starting with 978/979 as EAN-13 format.
Decide whether to include the EAN-13 check digit (the last
character in the barcode) in the data being transmitted.
Reference Manual
Disable
Enable
Max / Min
Length
(4-55)
One Check
Digit
Disable
Double
Modulo 10
Enable
Disable
Enable
Enable
Bookland
ISBN-10
Enable