Wake Up Mobile Computer - CipherLab CP55 Reference Manual

4.6.2. WAKE UP MOBILE COMPUTER

"Waking up" refers to restoring the suspended device to its previous working state. The
mobile computer can be awoken both manually and automatically.
MANUAL AWAKENING
Press (without holding) the power button or central scan key to wake up the mobile
computer.
AUTO-AWAKENING
The mobile computer wakes up by itself when either of the following happens:
USB or serial cable is plugged in
AC power cord is plugged in
WWAN ringing signal occurs
RTC alarm occurs
Note: There are certain cases when the mobile computer cannot be awoken:
(1) When battery door isn't installed in place.
(2) Imperfect contact exists between main battery and battery chamber contact pins.
Chapter 4 Operating System
117