Gps Viewer - CipherLab CP55 Reference Manual

CP55 Mobile Computer

7.2. GPS VIEWER

The mobile computer includes a GPS module (GPS hardware). This module communicates
with the Global Positioning System and discovers your location on earth if it has a piece of
GPS software to work with. The GPS module turns on automatically once GPS software
launches on the mobile computer.
For CP55 mobile computers equipped with GPRS, GPS Viewer comes as preinstalled GPS
software. To launch GPS Viewer:
1) Turn on Cellular data/GPS power as in
Select whether to enable A-GPS to assist location discovery in
2) Tap Start | Settings | System | GPS Viewer
GPS Viewer opens showing Status tab page. The GPS module turns on.
If there is a clear view of the sky, the built-in GPS module auto-searches for available
satellites and gets the mobile computer's current location. When finished, time, location,
signal-to-noise ratio (SNR) and other positioning information then display on-screen.
Note: For GPS Viewer to function properly, cellular data/GPS power must be enabled.
190
Power On Phone via Wireless
.
Reference Manual
Manager.
GPS Manager.