CipherLab CP55 Reference Manual page 246

CP55 Mobile Computer
TASK MANAGER
Monitors the memory and CPU resources consumed by each running application
and cached process. It also closes applications and switches the screen between
opened applications. See also
TIME SYNCHRONIZATION
Synchronizes the mobile computer's time with an NTP server, either automatically
or manually. Users can also select the time period for auto-synchronization.
Synchronized time will be written to RTC and system time will be updated.
Check Internet connection status if the following synchronization status shows:
"Cannot get time information through SNTP".
Note: For auto-synchronization to function properly, Time Synchronization
application should be shut down. Close the application when you are finished
adjusting the settings.
USB CONNECTION
Sets the type of USB connection without re-plugging the USB cable.
ActiveSync Serial Mode: Sets up ActiveSync connection with PC through
serial protocol.
Mass Storage – SD Card: Presents the mobile computer with an SD card
installed as a storage device. If no SD card is installed, the directory on the PC
will be blank.
Note: Selection of ActiveSync Advanced Network Mode or ActiveSync Serial Mode
will be synchronized with settings under Settings | System | USB to PC.
230
Task Manager.
Select the period to update time
Server used to synchronize time with.
New servers can be added/deleted with
the buttons below
Synchronization status
Tap to sync time with server
Reference Manual