CipherLab RS50 Reference Manual
  1. Manuals
  2. Brands
  3. CipherLab Manuals
  4. Handhelds
  5. RS50
  6. Reference manual

CipherLab RS50 Reference Manual

Hide thumbs Also See for RS50:
Table of Contents

Advertisement

Quick Links

Download this manual
RS50

Mobile Computer

(Android™ 6.0, Marshmallow)
Version 1.00

Advertisement

Table of Contents
loading

Related Manuals for CipherLab RS50

Summary of Contents for CipherLab RS50

  • Page 1: Mobile Computer

    RS50 Mobile Computer (Android™ 6.0, Marshmallow) Version 1.00...

  • Page 2: Preface

    The information contained in this document, including all pictures, illustrations and software, is the proprietary information of CIPHERLAB CO., LTD. and its respective legal owners; it is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties, with all rights reserved.

  • Page 3: Important Notices

    IMPORTANT NOTICES FOR USA FCC ID : Q3N-RS50 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 4 Important Notices FOR PRODUCT WITH LASER This laser component emits FDA / IEC Class 2 laser light at  the exit port. Do NOT STARE INTO BEAM DIRECTLY. Do not aim the beam at the eyes.  Any adjustments or performance excluding those specified may ...
  • Page 5 Important Notices Do not use any batteries or charging devices which are not originally sold  Do not replace the battery with an incorrect type, to avoid the risk of heat  generation, fire, or explosion. Do not disassemble, incinerate or short circuit the battery. ...
  • Page 6 Important Notices 1) Open ReaderConfig and tap Scan Test on the menu bar.  Aim the scanning window at the barcode to read. Move the device,  having the barcode located in the center of the scanning area. 3) Press any of the two side triggers. The scanning light beams to read the ...
  • Page 7 Important Notices CONNECTION Via Bluetooth or WLAN  Connection may fail when the handy terminal is around other wireless  machines or power cables as the radio frequencies of those may cause interferences. If communication fails, move the devices much closer to each other, and try ...
  • Page 8 Important Notices USA E-LABEL - 8 -...
  • Page 9 Important Notices EUROPE - EU DECLARATION OF CONFORMITY - 9 -...
  • Page 10 Important Notices - 10 -...
  • Page 11 Hereby, CIPHERLAB CO. LTD, declares that this RS50 is in compliance with the essential requirements and English other relevant provisions of Directive 1999/5/EC. Español Por medio de la presente CIPHERLAB CO. LTD declara que el RS50 cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. [Spanish] Ελληνική...

  • Page 12: Release Notes

    Release Notes RELEASE NOTES Version Date Notes 1.00a Mar 23, 2016 release 1.00 Nov 10, 2016 Initial release - 12 -...

  • Page 13: Table Of Contents

    CONTENTS PREFACE ............................- 2 -   Copyright ............................- 2 -   Disclaimer ............................- 2 -   Trademark Recognition ......................... - 2 -   Contact ............................- 2 -   RELEASE NOTES ..........................- 12 -   CONTENTS ............................13  ...

  • Page 14: Introduction

    Introduction INTRODUCTION The RS50 Mobile Computer, powered by Android™ 6.0, Marshmallow, is light-weight, easy to use, and provides more powerful and handy tools. Specifically designed to work as an industrial PDA, it provides rich options of data collection, voice and data communication, long-lasting working hours, and so on. Its large color transmissive display guarantees ease in reading in all lighting conditions.

  • Page 15: Quick Start

    Quick Start Chapter 1 QUICK START OVERVIEW...
  • Page 16 Quick Start Description Description Status LED Proximity+ALS Sensor Phone Receiver Power Button Side Key Microphone Charging & Communication Pins Touchscreen Scan Window Headset Jack Volume Buttons Loudspeaker NFC Detection Area Battery Latch Camera Flash Battery (with Cover) Rear Microphone Camera Lens...

  • Page 17: Installing Battery

    2) Push the upper end in, the battery latch will click into place with a “click” sound IMPORTANT CHARGING INFORMATION Input: AC 100-240V, 50-60Hz; output: 5V/2A Power Supply CipherLab approved Battery Pack 3.8V 4000mAH/3.8V 5300mAH (Standard/Extended) (Optional) rechargeable Li-ion CipherLab proprietary Approx. 5 hours/6 hours (Standard/Extended battery) via Charging time adapter...
  • Page 18 Quick Start REMOVE BATTERY 1) Press down the power key and tap “Power off” to shut down this device. 2) Slide the key latch Right, the battery will be unlocked with a “click” sound. 3) Lift the battery up from its upper end.

  • Page 19: Installing Sim Card, Sam Card And Memory Card

    Quick Start INSTALLING SIM CARD, SAM CARD AND MEMORY CARD The RS50 Mobile Computer is equipped with two SIM card slots, one SAM card slot and one memory card slot. To insert the cards: 1) Remove the battery. 2) Inser your fingernail into the notch above the inner lid that protects the card sockets chamber and lift it up.

  • Page 20: Power On/Off Mobile Computer

    Down key to confirm [Normal Boot] to return to the normal booting process. Any system failure, data loss or unexpected consequences arising from your entering the other two options - [Recovery Mode] and [Factory Mode] is out of CIPHERLAB ’s warranty coverage. POWER OFF...

  • Page 21: Homescreen Selection

    Quick Start 1.1.2. HOMESCREEN SELECTION Upon the first time you launch the system, a Select Home app window will pop up to request your immediate choice of home screen. By selecting “AppLock”, you will directly enter AppLock application (please refer to AppLock User Guide for detailed instructions on AppLock settings) to start configuring the interface provided to normal users of this device;...

  • Page 22: Using Hardware Buttons

    Quick Start 1.1.3. USING HARDWARE BUTTONS On the bottom of the mobile computer are three hardware buttons that deliver the following functions: Button Function Description Returns to the previous screen or closes Back button the active window or keyboard. Home button Displays the Home screen.

  • Page 23: Charging & Communication

    Quick Start 1.2. CHARGING & COMMUNICATION 1.2.1. CHARGE MOBILE COMPUTER The main battery may not be charged to full for shipment. When you first receive the kit package, you will need to charge the main battery to full before using the mobile computer. You may use the Snap-on Charging Cable or Charging Cradle along with a power adapter to charge the mobile computer.
  • Page 24 Quick Start USE SNAP-ON CHARGING CABLE The Snap-on Charging Cable provides a convenient way to charge your mobile computer. 1) Fasten the Snap-on Charging Cable to the lower end of the mobile computer. 2) Connect the other end of the cable to the adapter. 3) Fix the adapter plug onto the adapter, and plug in into an electrical outlet.
  • Page 25 2) Connect the adapter to the Cradle, and plug the other end into an electrical outlet. The status of the mobile computer charging is shown on the device itself, while the LED indicator on RS50 Charging Cradle shows the status of battery charging as below: Cradle LED Indicator...
  • Page 26 Quick Start Note: (1) Not Charging could be the result of battery damage, battery’s failure to touch the connector, or AC plug coming off. (2) Charging error could be due to high battery temperature.

  • Page 27: Wired Data Transmission

    Quick Start 1.2.2. WIRED DATA TRANSMISSION Use the micro USB cable to connect the mobile computer to your PC for data transmission. 1) Connect your device to the computer with supplied USB cable. 2) Swipe down from the status bar to reveal Notifications Drawer. 3) Tap “USB for Charging”...

  • Page 28: Specifications

    Specifications SPECIFICATIONS PLATFORM, PROCESSOR & MEMORY Operating System & CPU OS Version Android™ 6.0 Marshmallow with GMS Certified Cortex A53 Octa-core Memory 16GB eMMC Expansion Slot One microSDHC card slot (up to 32GB) SDXC supported (up to 2TB) Micro SIM socket x2 Micro SAM socketx1 COMMUNICATION &...

  • Page 29: Electrical Characteristics

    Specifications ELECTRICAL CHARACTERISTICS Batteries Main Battery Pack Rechargeable Li-ion battery: 3.8V, 5300mAh Charging temperature: 0-35°C Minimum charging time: 5 hours 25°C Please Charge batteries in temperatures from 0°C to 35°C. To ensure that the battery is being charged under a safe condition, the battery may disable charging when ambient temperature drops below 0°C or exceeds 40°C, and resume charging after its temperature falls within the acceptable range.

  • Page 30: Environmental Characteristics

    Specifications ENVIRONMENTAL CHARACTERISTICS Temperature Operating -20°C to 50°C Storage -30°C 70°C Charging 0°C to 35°C Humidity Operating 5% to 85% (non-condensing) Resistance Impact Resistance Multiple drops onto concrete at 1.5 m on all six sides Tumble Test 1000 times at 1m per applicable IEC tumble specifications Electrostatic Discharge ±15 kV air discharge, ±8 kV contact discharge...

  • Page 31: Programming Support

    Specifications PROGRAMMING SUPPORT Development Environment & Tools JAVA Environment Android studio Software Development Kit: JAR Environment: Visual Studio Software Development Kit: DLL (Xamarin Library) Software & Utilities  Reader Configuration Software Package  Software Trigger Key  Programmable Keys  WMDS Server ...

Table of Contents