Wake Up Mobile Computer; Reset Mobile Computer - CipherLab CP50 Manual Manual

CP50 Mobile Computer
Note the following cases also suspend the mobile computer:
Battery door isn't in place.
Main battery level drops under 6%.
Battery fails.
To get the most from the battery power, see

4.4.2. WAKE UP MOBILE COMPUTER

"Waking up" is to restore the suspended device to its previous working state. The mobile
computer is awakenable both manually and automatically.
MANUAL AWAKENING
Press (without holding) the physical Power button or central scan key to wake up the mobile
computer.
AUTO-AWAKING
The mobile computer wakes up by itself when either of the following happens:
Plugging of USB cable.
WWAN ringing signal gets active.

4.4.3. RESET MOBILE COMPUTER

The mobile computer features 2 reset mechanisms, warm boot and cold boot. These boots
troubleshoot some problems in the O.S. and applications. Make use of the physical Power
button and the reset toggle recessed in a cutout on the mobile computer's front bezel to
generate said boots.
[1] Power button
[2] Reset toggle
102
Optimize Battery Life.
Figure 18: Reset
Reference Manual