Printer Control Setting; Setting Print Output; Setting Print Mode - JRC JFE-680 Instruction Manual

4.6 Printer Control Setting

Note: JFE-680 electrically stores last 12or 24hours depth data. Printer runs after only
your [PRINT] pressing.
The following menu is displayed with [MENU]・PRINTER CONT
PRINTER CONT
PRINTER
PRINT MODE
LOG BOOK PRINT
LOG LENGTH
SPEED
PRINTER MODEL SLECTION
※The above-mentioned set content
is an initial value.
*JFE-680 standard printer
setting is NKG-901.

Setting Print Output

This item selects the [PRINT] key function ON or OFF.
・Select "PRINTER" with
Detail item
：OFF/ON
OFF
ON
・Select the item by

Setting Print Mode

This item selects print out mode by three items.
・Select "PRINT MODE" with
Detail item
COPY
HITORY
LOG
・ Select the item by
Note: Please read a detailed explanation of the each print mode item with next page.
4. Operation 32
ON
COPY
OFF
10min
4800bps
NKG-901*
or key. Then press
：The print key is invalidated.
：The print key is validated.
or key. Then press the [ENT] key.
or key. Then press
：COPY/HISTORY/LOG
：
： The item function is different according to the setting of
： "COMMUNICATION > PRINTER PORT OUT" of the menu.
or key. Then press the [ENT] key.
.
・ A present selection item is displayed with a yellow
character.
・ To select items, use
・ Press or the [ENT] key after the item selection,
the detail setting will displayed.
・ Press the [ENT] key after the detail setting selection.
Then the settings would be registered and the menu
would return to previous screen.
・ To return to a previous screen without registering,
press or the [CLR] key.
or the [ENT] key to enter the detail setting.
or the [ENT] key to enter the detail setting.
(Refer to 4.7 communication setting.)
or key to choose.