Product description
3.3.1.2
Server rear
Figure 6: Connectors on the I/O panel
1* Serial connector (optional)
2
Shared LAN connector
3
LAN connector
4
2x USB connectors (USB 3.0) 8
*
The serial connector can be used as the standard interface or for
communication with iRMC.
The corresponding indicators are explained in section
rear" on page
36.
I
Depending on the BIOS settings, the shared LAN connector may also be
used as a management LAN connector. For more information, see the
corresponding BIOS Setup Utility reference manual.
I
Some of the devices connected require special software (e.g. drivers)
(see documentation for the connected device).
28
5
2x USB connectors (USB 3.0)
6
Video connector (VGA)
7
Management LAN connector (for
iRMC server management function)
Dedicated slot for OCP modules
Operating Manual
"Indicators on the server
TX2550 M5