Table of Contents
Advertisement
User Interfaces
Interface Type
<1>
G.703 Interface
Type
<1>
BPSK Symbol
Pairing
<1>
AUPC Enable
<2>
AUPC Eb/No
<2>
AUPC Minimum
Power Limit
<2>
AUPC Maximum
Power Limit
4-56
DMD2401 LB/ST L-Band Satellite Modem and ODU Driver
Multiprotocol interface card is installed. If not, set to
zero.
0 = V.35,1 = RS-422, 2 = RS-232
Note: The following byte applies only if a symmetric
G.703 interface card is installed. If not, set to zero.
0 = G703T1AMI
1 = G703T1B8ZS
2 = G703BE1
3 = G703UE1
Note: The following byte applies to all DMD2401
modems, regardless of interface type.
0 = Normal, 1 = Swapped
Note: The following byte applies only if an
Asynchronous Interface Card, or an IDR OR IBS Interface
Card is installed, AND the AUPC option is also installed.
If not, set to zero.
Note: AUPC minimum power level < AUPC default power
level < AUPC max. power level.
0 = Disabled, 1 = Enabled
Note: The following two bytes apply only if an
Asynchronous Interface Card, or an IDR OR IBS Interface
Card is installed, AND the AUPC option is also installed.
If not, set to zero.
Note: AUPC minimum power level < AUPC default power
level < AUPC max. power level.
Unsigned Binary, 1 Decimal Point Implied
Note: The following two bytes apply only if an
Asynchronous Interface Card, or an IDR OR IBS Interface
Card is installed, AND the AUPC option is also installed.
If not, set to zero.
Note: AUPC minimum power level < AUPC default power
level < AUPC max. power level.
Signed Value, –50 to –300 (–5.0 to –30 dBm), Implied
Decimal Point
Note: The following two bytes apply only if an
Asynchronous Interface Card, or an IDR OR IBS Interface
Card is installed, AND the AUPC option is also installed.
If not, set to zero.
TM075 – Rev. 1.3
Advertisement
Table of Contents
