Radyne DMD2401 LB Installation And Operation Manual page 48

DMD2401 LB/ST L-Band Satellite Modem and ODU Driver
TxuProc Mask:
TxPower Mask:
TxOSClk Mask:
CompCLK Mask:
TxSynth Mask:
Tx FPGA Mask:
Ref PLL Mask:
Tx Force:
Major Rx (menu):
RxuProc Mask:
SigLock Mask:
IFSynth Mask:
BuffPLL Mask:
TM075 - Rev. 1.3
{Pass/Fail, No/Yes}
Tx Processor fault. Indicates a HARDWARE Transmit
or DSP Failure within the modem.
Yes = Masked, No = Unmasked
{Pass/Fail, No/Yes}
Indicates that the Modem Tx Output Power is within
allowed tolerances.
{Pass/Fail, No/Yes}
Indicates that the Tx Oversample Clock PLL is not
locked. This alarm will flash 'On' during certain modem
parameter changes.
{Pass/Fail, No/Yes}
Indicates that the Tx Composite Clock PLL is not
locked. This alarm will flash 'On' during certain modem
parameter changes.
{Pass/Fail, No/Yes}
Indicates that the Tx IF Synthesizer is not locked. This
alarm will flash 'On' during certain modem parameter
changes.
{Pass/Fail, No/Yes}
This alarm indicates a Transmit Hardware FPGA failure
within the modem.
{Pass/Fail, No/Yes}
This alarm indicates that the Modem Synthesizers are
not locked to the external reference.
{Pass/Fails}
Allows a Major Tx Alarm to be forced (for testing
purposes, etc.).
{Pass/Fail, No/Yes}
Rx Processor fault. Indicates a Receive DSP Hardware
failure within the modem.
{Pass/Fail, No/Yes}
Indicates that the Demodulator is unable to lock to a
signal.
{Pass/Fail, No/Yes}
Indicates the Rx IF Synthesizer is not locked. This
alarm will flash 'On' during certain modem parameter
changes.
{Pass/Fail, No/Yes}
Indicates that the Buffer Clock PLL is not locked. This
alarm will flash 'On' during certain modem parameter
changes.
User Interfaces
4-11