Table of Contents
Advertisement
DMD2401 LB/ST L-Band Satellite Modem and ODU Driver
<1>
Receive Mode
<1>
T1/E1 Frame
Source
<1>
Receive IDR
Overhead Mode
<1>
Receive IDR
Backward Alarms
Mask
<1>
Interface Type (If
G.703 Daughter
Card Installed)
<2>
Receive ESC
Audio #1 Volume
<2>
Receive ESC
Audio #2 Volume
<1>
Reserved
TM075 - Rev. 1.3
Note: The following byte applies only if an IDR OR IBS
interface card is installed. If not, ignore.
0 = Closed Net Mode
1 = IDR Mode
2 = IBS Mode
Note: The following byte applies only if an IDR OR IBS
interface card is installed and the Receive Mode is set to
IDR Mode. If not, ignore
0 = Internal, 1 = External
Note: The following byte applies only if an IDR OR IBS
interface card is installed and the Receive Mode is set to
IDR Mode. If not, ignore
0 = Voice, 1 = 64 K Data
Note: The following byte applies only if an IDR OR IBS
interface card is installed and the Receive Mode is set to
IDR Mode. If not, ignore
Bit 0 = IDR Backward Alarm 1
Bit 1 = IDR Backward Alarm 2
Bit 2 = IDR Backward Alarm 3
Bit 3 = IDR Backward Alarm 4
Bits 4 - 7 = Spares
(0 = Mask, 1 = Allow)
Note: The following byte applies only if an IDR OR IBS
interface card is installed and the Receive Mode is set to
IDR Mode. If not, ignore
0 = G.703 Unbalanced E1
1 = G.703 Balanced E1
2 = G.703 T1, B8ZS
If synchronous multiprotocol daughter card is installed:
0 = V.35, 1 = RS-422, 2 = RS-232
Note: The following two bytes apply only if an IDR OR
IBS interface card is installed and the Receive Mode is set
to IDR Mode. If not, ignore
-20 to +10, Signed Binary Value in dB
Note: The following two bytes apply only if an IDR OR
IBS interface card is installed and the Receive Mode is set
to IDR Mode. If not, ignore
-20 to +10, Signed Binary Value in dB
User Interfaces
4-67
Advertisement
Table of Contents
