Radyne DMD2401 LB Installation And Operation Manual page 52

DMD2401 LB/ST L-Band Satellite Modem and ODU Driver
TxOSClk:
CompCLK:
TxSynth:
Tx FPGA:
Ref PLL:
Tx Force:
Major Rx (menu):
RxuProc:
SigLoss:
FrmSync:
IFSynth:
BuffPLL:
RxLevel:
TM075 - Rev. 1.3
{Pass/Fail}
Indicates that the Tx Oversample Clock PLL is not
locked. This alarm will flash 'On' during certain modem
parameter changes.
{Pass/Fail}
Indicates that the Tx Composite Clock PLL is not
locked. This alarm will flash 'On' during certain modem
parameter changes.
{Pass/Fail}
Indicates that the Tx IF Synthesizer is not locked. This
alarm will flash 'On' during certain modem parameter
changes.
{Pass/Fail}
This alarm indicates a Transmit Hardware FPGA failure
within the modem.
{Pass/Fail}
This alarm indicates that the Modem Synthesizers are
not locked to the external reference.
{Pass/Fails}
Allows a Major Tx Alarm to be forced (for testing
purposes, etc.).
{Pass/Fail}
Indicates a Receive DSP Hardware failure within the
modem.
{Pass/Fail}
Indicates that the demod is unable to lock to a signal.
{Pass/Fail}
Indicates that the Framing Unit is unable to find the
expected framing pattern.
{Pass/Fail}
Indicates the Rx IF Synthesizer is not locked. This
alarm will flash 'On' during certain modem parameter
changes.
{Pass/Fail}
Indicates that the Buffer Clock PLL is not locked. This
alarm will flash 'On' during certain modem parameter
changes.
{Pass/Fail}
This alarm indicates that the Receive Automatic Gain
Control is saturated (i.e., too much signal power is being
supplied to the modem).
User Interfaces
4-15