Radyne DMD2401 LB Installation And Operation Manual page 54

DMD2401 LB/ST L-Band Satellite Modem and ODU Driver
Rx Activity (menu):
Buf Clk Mask:
Ext BNC Mask:
Rx Sat Mask:
ExtRef Mask:
SatAIS Mask:
Rx RS Faults (menu):
DecLock Mask:
Dintlvr Mask:
UnCWord Mask:
IBS Alarms (menu):
Prompt Mask:
Service Mask:
BER Mask:
Common (menu):
-12Volt Mask:
+12Volt Mask:
+5Volt Mask:
TM075 - Rev. 1.3
{Pass/Fail, No/Yes}
Indicates that the selected buffer clock source is not
active.
{Pass/Fail, No/Yes}
Indicates no activity on the External BNC Clock Port.
{Pass/Fail, No/Yes}
Indicates that the Rx Sat Buffer clock source is not
active.
{Pass/Fail, No/Yes}
Indicates no activity on the external reference.
{Pass/Fail, No/Yes}
Fail indicates a loss of satellite data.
{Pass/Fail, No/Yes}
Indicates the status of the Reed-Solomon Decoder Lock.
{Pass/Fail, No/Yes}
Indicates the status of the Reed-Solomon De-interleaver
word fault.
{Pass/Fail, No/Yes}
Indicates the status of the Reed-Solomon uncoded word
fault.
{Pass/Fail, No/Yes}
Indicates that a Prompt Maintenance Alarm is generated
as defined in Rec. ITU-T6.803.
{Pass/Fail, No/Yes}
Indicates that a Service Alarm is generated as defined
in Rec. ITU-T6.803.
{Pass/Fail, No/Yes}
Fail indicates a BER of 1 x 10
input.
{Pass/Fail, No/Yes}
Indicates the power supply voltage is out of range.
{Pass/Fail, No/Yes}
Indicates the power supply voltage is out of range.
{Pass/Fail, No/Yes}
Indicates the power supply voltage is out of range.
User Interfaces
-3
or greater from satellite
4-17