Radyne DMD2401 LB Installation And Operation Manual page 51

User Interfaces
Common (menu):
-12Volt Mask:
+12Volt Mask:
+5Volt Mask:
Temp Mask:
IntFPGA Mask:
Battery Mask:
RAM/ROM Mask:
M&CProc Mask:
Ref PLL Mask:
Ext EXC Mask:
Ext Ref Mask:
HS Ref Mask:
HSRf PLL Mask:
Latched Alrm (menu):
Major Tx (menu):
TxuProc:
TxPower:
4-14
DMD2401 LB/ST L-Band Satellite Modem and ODU Driver
{Pass/Fail, No/Yes}
Indicates the power supply voltage is out of range.
{Pass/Fail, No/Yes}
Indicates the power supply voltage is out of range.
{Pass/Fail, No/Yes}
Indicates the power supply voltage is out of range.
{Pass/Fail, No/Yes}
Fail indicates that internal temperature of the modem is
out of range.
{Pass/Fail, No/Yes}
Indicates a hardware failure on the Interface Card.
{Pass/Fail, No/Yes}
Indicates that the Internal Clock Battery is low.
{Pass/Fail, No/Yes}
Indicates an M&C Memory fault.
{Pass/Fail, No/Yes}
Indicates an M&C Microprocessor hardware failure.
{Pass/Fail, No/Yes}
Indicates that the External Reference PLL is not locked.
{Pass/Fail, No/Yes}
Indicates that the External Clock is not active.
{Pass/Fail, No/Yes}
Indicates no activity on the External Reference.
{Pass/Fail, No/Yes}
Indicates ???.
{Pass/Fail, No/Yes}
Indicates ???.
{Pass/Fail}
Tx Processor fault. Indicates a Hardware Transmit DSP
failure within the modem.
{Pass/Fail}
Indicates that the Modem Tx Output Power is within the
allowed tolerance.
TM075 – Rev. 1.3