Radyne DMD2401 LB Installation And Operation Manual page 53

User Interfaces
Rx FPGA:
Minor Tx (menu):
Tx Activity (menu):
TerrClk:
Int Clk:
BNC Clk:
TxSatCk:
Tx Data:
TerrAIS:
RS FIFO:
Tx Cal:
Minor Rx (menu):
BufUFlw:
BufOFlw:
Buf<10%:
Buf>90%:
VitLock:
SeqLock:
4-16
DMD2401 LB/ST L-Band Satellite Modem and ODU Driver
{Pass/Fail}
This alarm indicates that a Receive FPGA Hardware
fault has occurred.
{Pass/Fail}
Indicates no Terrestrial Clock activity.
{Pass/Fail}
Indicates no SCT Clock activity.
{Pass/Fail}
Indicates no activity on the External BNC Clock.
{Pass/Fail}
Indicates no Tx Sat Clock activity.
{Pass/Fail}
Indicates no Tx Data activity.
{Pass/Fail}
Indicates that AIS has been detected in the Terrestrial
Data Stream.
{Pass/Fail}
Indicates the status of the Tx Reed-Solomon FIFO.
{Pass/Fail}
Indicates that the modem has been calibrated for the
output power level.
{Pass/Fail}
Indicates that a Doppler Buffer underflow has occurred.
{Pass/Fail}
Indicates that a Doppler Buffer overflow has occurred.
{Pass/Fail}
Indicates that the Doppler Buffer has gone below 10%
full and may underflow.
{Pass/Fail}
Indicates that the Doppler Buffer has gone above 90%
full and may overflow.
{Pass/Fail}
Indicates that the Viterbi Decoder is not locked.
{Pass/Fail}
Indicates that the Sequential Decoder is not locked.
TM075 – Rev. 1.3