1
2
3
4
3
1
Workshop Manual Ed.09-2012
CYLINDER HEAD REMOVAL/DISASSEMBLY
TR 650 TERRA 2013 - TR 650 STRADA 2013
Checking the decompression lever
- With the spring fully extended, the minimum projection of the weight is equal
to A: 0.7 mm (0.03 in).
- When activated, the projection of the centrifugal weight on the base circum-
ference of the cam must not be less than the measurement (A).
-
Replace the decompression lever if the distance is lower.
A
H11576
Removing the decompression lever
- Use a punch to extract the pin (1) from the weight (2).
-
Remove the spring (3).
H11577
Installing the decompression lever
-
Insert the new spring (1) into the camshaft (2).
-
Install the weight (3), install the pin (4).
2
H11578
F2.6