Table of Contents
Advertisement
TR 650 TERRA 2013 - TR 650 STRADA 2013
3
1
5
1
8
2
CRANKCASE DISASSEMBLY
Gearbox shafts installation
-
Oil the gearbox shaft main bearing seats.
-
Install the input shaft (3) and output shaft (4) of the gearbox.
4
-
Use a plastic mallet to tap the shafts until they are fully mated with their seats.
Fork installation
-
During installation pay attention to the proper fork and shaft coupling.
-
Install the engagement fork (5) onto the input shaft (3).
-
Install the engagement forks (6) and (7) onto the output shafts.
-
Insert the engagement forks (5), (6) and (7) into the corresponding sliding
gears of the gearbox shaft.
-
Rotate the forks inwards and insert the ratchet guides into the selector drum
(8).
H11630
-
Insert the pins (1) into their seats.
6
1
7
H11631
Engagement system check
-
Test proper gearbox operation by checking if the ratchet engages and dis-
engages all the gears correctly from the star positioned on the selector drum
(You should hear a "click" at engagement).
H11632
F3.15
Workshop Manual Ed.09-2012
Hide quick links:
Advertisement
Chapters
Table of Contents
