Reassembling The Front Wheel - Husqvarna TR 650 TERRA 2013 Workshop Manual

CHASSIS AND WHEELS
TR 650 TERRA 2013 - TR 650 STRADA 2013
1
H11731
2
H11732
4
3
H11748
4
4
H11733

Reassembling the front wheel

Fit the L.H. spacer (1) on the wheel hub.
Fit the wheel between the fork legs so as to set the brake disc into the calliper.
Fit the wheel axle (2) from the R.H. side, after greasing it and push it fully
home against the L.H. fork leg; during this operation, the wheel should be
turned.
Tighten the nut (3) on the left-hand side of the fork WITHOUT locking it. Now,
pump for a while, pushing the handlebar downwards until you are sure that the
fork legs are perfectly aligned. Lock: the screws (4) on the right-hand fork leg (8
Nm, 0.8 kgm, 5.9 ft/lb), the nut (3) on the left-hand side (80 Nm, 8 kgm, 59.005
ft/lb) and the screws (1) on the left-hand fork leg (8 Nm, 0.8 kgm, 5.9 ft/lb).
After reassembly, pull the brake control lever until the pads are
against the brake disc.
Y.9
Workshop Manual Ed. 09-2012