Husqvarna TR 650 TERRA 2013 Workshop Manual page 49

TR 650 TERRA 2013 - TR 650 STRADA 2013
10
11
12
13
14
13
SETTINGS AND ADJUSTMENTS
- Loosen the clamp (9) and remove the intake coupling (10) from the cylinder
head.
When refitting the intake coupling (10) make sure you place the
9
prong (A) on the slot (B) of the intake manifold.
- Disconnect the cylinder head from the electrical system.
H11718
10
A
B
H11719
- Move the two pipes (11) of the ABS to unscrew the screw (12), then un-
screw the screws (13) and remove them.
H11720
- Remove the head cover (14) at the back of the motorcycle; if this is difficult,
remove the intake manifold (15) by unscrewing the corresponding screws
without losing the corresponding gaskets.
- Adjust valve clearance as described in the relevant paragraph in Section F.
15
H11721
D.19
Workshop Manual Ed. 09-2012