TR 650 TERRA 2013 - TR 650 STRADA 2013
1
2
4
3
2
1
2
1
CRANKCASE DISASSEMBLY
Replacement of the selector drum (engine disassembled)
-
Lift the pins (1) slightly until extracting them from the crankcase.
1
-
Move the pins and forks to free the drum (2).
-
Extract the selector drum (2).
H11639
-
Check that the guides (3) of the selector drum and the insulating washer (4)
are not worn.
H11640
Installation:
-
Move the ratchet (1) so that the drum (2) can be easily fit.
-
Check that the ratchet (1) is properly positioned on the drum star (2).
-
Turn the selector drum (2) to the neutral position (arrow).
(The ratchet (1) is in the position shown in figure (arrow)).
-
Rotate the pins (3) towards the drum (2) with the relative forks inserting the
ratchets (4) into the relative drum slots.
-
Use a plastic mallet to tap the pins (3) into their seats.
Engagement system check
-
Test proper gearbox operation by checking if the ratchet engages and dis-
engages all the gears correctly from the star positioned on the selector drum
(You should hear a "click" at engagement).
H11641
H11642
F3.19
3
4
H11643
Workshop Manual Ed.09-2012