Configuring Snmp Access Control - Motorola AP-51 Series Product Reference Manual

6. Click Apply to save any changes to the SNMP Access screen. Navigating away from the
screen without clicking the Apply button results in all changes to the screen being lost.
7. Click Undo Changes
settings displayed on the SNMP Access screen to the last saved configuration.
8. Click Logout
confirming the logout before the applet is closed.
For additional SNMP configuration information, see:
•

Configuring SNMP Access Control

• Enabling SNMP Traps
• Configuring Specific SNMP Traps
• Configuring SNMP RF Trap Thresholds
4.5.1 Configuring SNMP Access Control
Use the SNMP Access Control
which users can read SNMP generated information and, if capable, modify related settings from an
SNMP-capable client.
Use the SNMP Access Control screen's Access Control List (ACL) to limit, by Internet Protocol (IP)
address, who can access the access point SNMP interface.
NOTE The ACL applies to both SNMP v3 user definitions and SNMP v1/v2c
To configure SNMP user access control for the access point:
1. Select System Configuration
on the SNMP Access Control
(if necessary) to undo any changes made. Undo Changes reverts the
to securely exit the access point Access Point applet. A prompt displays
screen (as launched from the SNMP Access screen) to specify
community definitions on the access point SNMP Access screen.
- > SNMP Access
button from within the SNMP Access screen.
System Configuration
from the access point menu tree. Click
4-33