Configuring Wips Server Settings - Motorola AP-51 Series Product Reference Manual

5-66 AP-51xx Access Point Product Reference Guide
NOTE Though the Rogue AP and Firewall features appear after the Bandwidth

5.4 Configuring WIPS Server Settings

With this most recent release of the access point firmware, an access point radio can function as a
Wireless Intrusion Protection System (WIPS) sensor and upload sensor mode operation information
to its parent WIPS Server. Either or both of the access point's radios can be set as a WIPS sensor.
When an access point radio is functioning as a WIPS sensor, it is able to scan in sensor mode across
all available channels.
Additionally, use the
information for use within the WIPS console for device management and potential threat notification.
To define the attributes of the WIPS Server:
1. Select Network Configuration
Management features within the access point menu tree, they are
described in Chapter 6, Configuring Access Point Security on page
both items are data protection functions. More specifically, see,
Configuring Firewall Settings on page 6-27
Detection on page 6-55.
WIPS screen to define a primary and alternate WIPS server to submit event
-> Wireless -> WIPS from the access point menu tree.
and Configuring Rogue AP
6-1, as