Motorola AP-51 Series Product Reference Manual page 383

AP51xx>admin(network.wan)> show
Description:
Displays the access point WAN port parameters.
Syntax:
show Shows the general IP parameters for the WAN port along with settings for the WAN interface..
Example:
admin(network.wan)>show
Status
Primary DNS Server
Secondary DNS Server
Auto-negotiation
Speed
Duplex
WAN IP 2
WAN IP 3
WAN IP 4
WAN IP 5
WAN IP 6
WAN IP 7
WAN IP 8
PPPoE Mode
PPPoE User Name
PPPoE Password
PPPoE keepalive mode
PPPoE Idle Time
PPPoE Authentication Type
PPPoE State
admin(network.wan)>
For an overview of the WAN configuration options available using the applet (GUI), see
Configuring WAN Settings on page
: enable
: 0.0.0.0
: 0.0.0.0
: disable
: 100M
: full
: disable
: disable
: disable
: disable
: disable
: disable
: disable
: enable
: JohnDoe
: *******
: enable
: 600
: chap
5-16.
8-41